00:12hello friends welcome to solid edge tutorial in this tutorial we are going to learn how to
00:17use solid edge basic commands like solid edge extrude extrude cut pattern lock command
00:22for that we will create one 3d model as a coca-cola cap so let's start extrude
00:28cut command select top plane
00:33take a circle by center point
00:39of 30 mm diameter and close sketch
00:45extrude with 0.1 mm distance click ok finish cancel click on extrude cut command select top face again
00:57and take one circle by center point start from origin of 30 mm diameter and escape take a line
01:11start from origin up to the 30 mm diameter circle click ok make this line into construction mode click on
01:20construction and select line we have this line in construction mode again click on arc by 3 point
01:31so this is the first point this is the second point and this is the third point
01:39so delete this radius dimension again this should be 3
01:48distance from this point to the arc end point would be 4.71 divided by 2 and
01:59we have this edge in fully defined mode because it is in totally black color so trim and trim this
02:10outside circle
02:12close sketch
02:16extrude wall select direction finish cancel so we have this extrude cut here click on pattern command
02:28pattern pattern select the feature to pattern this is extrude cut one and click ok select the face or plane
02:40and select the start point
02:44select the direction and enter the spacing or count here so we have 20 counts close sketch
02:52edge and finish we have this cut out and its pattern now take a plane parallel to this top face
03:06click on parallel
03:09take the top face and view distance as a 4mm click ok take a sketch select plane
03:21then click on circle by center point click on circle by center point start from origin
03:27with the dimension of 26.5 mm and close sketch finish cancel click on lock command
03:40select the sketch number one and you need to select this all
03:56preview preview and finish cancel we have used it here flopped command
04:03write this plane number four once again click on parallel plane
04:10click on this top face and view distance as a 3mm
04:15click ok click ok click ok h select plate number 5
04:21and click on circle by center point start from origin circle of 25 mm diameter and close sketch
04:34finish cancel once again click on lock command select this circle and
04:41and another one circle preview preview and finish cancel so we have
04:50one more lofted profile here so hide these planes and sketches
04:58click on around
05:04select this top corner
05:06view the radius as 2.5 mm diameter and view the radius as 2.5 mm diameter click ok preview
05:11finish
05:12cancel we need to create a hollow portion here for that we will use thin wall command click on thin
05:23wall
05:24and give it the thickness for this thin wall as 0.5 mm diameter select the face to open and
05:34click ok
05:36and preview so finish finish we have shell command here or thin wall command
05:46we have to add logo on this cap as well for that go to the view tab in which a
05:53styles in which click on
06:01we need to give here the name and there that is logo and go to the texture
06:11browse we have one logo in our folder so select that logo and open and apply this click ok
06:21so we have here logo name one texture so we have here logo name one texture you can see here
06:30logo
06:32and okay so click on part painter select on this is a logo
06:41we have this logo we have this logo and replace styles select the body and close so we have coca
06:52-cola
06:53logo logo on this cap as well
06:56you
06:56you
06:56you
07:03you
Comments