Single Cell 18650 Battery Shield | 18650 Battery Holder | Robu.in | 18650 |ESP32 | ESP8266 | Rpi | - video Dailymotion

Watch Single Cell 18650 Battery Shield | 18650 Battery Holder | Robu.in | 18650 |ESP32 | ESP8266 | Rpi | - Fusion Automate on Dailymotion

Transcript

00:00Hi, here we have the 18650 battery shield for ESP32, ESP8266 and the Raspberry Pi.

00:07OK, you can turn on this shield using this mechanical switch.

00:11So, it is turned on. I can turn off from the same switch.

00:15Now, here from this side you will have the output of 3 volt and this side you will have output of 5 volt.

00:21OK, and you can charge this cell using this micro USB input

00:26and here in the D1 and D2 you can see the status of your battery and if the battery is charged or not.

00:33Now, you can use this shield while charging as well.

00:37OK, so if you are charging this cell then also you can use your output.

00:42So, while charging you can use this shield as well.

00:45OK, so that's it. Don't forget to subscribe to Fusion Automate.