00:00What do you think, Space UFO means Unidentified Object, which is called Alien Spaceship by many.
00:16But is this UFO flying in the sky?
00:19No, it is floating on water.
00:21How is it possible?
00:22Let's see how this UFO is made to float on water.
00:31Isn't it amazing?
00:32How can such a sophisticated thing be made in such a small garage?
00:36Yes, because it was homemade.
00:39But to make this UFO, it is necessary to take the correct measurements.
00:43Then, some parts of the steel are specially cut to make the frame.
00:49And here begins an unbelievable discovery.
00:52Imagine, soil is being mixed to make something like this.
00:56What will happen next?
01:00Okay, this person wanted to make the shape of a UFO.
01:09Then?
01:21Oh my God!
01:22What did he make from what?
01:24Nothing like that.
01:29Colorful glue is used to apply foam.
01:35After applying foam, the frame has to be made.
01:54A huge frame is ready.
02:06After applying a lot of glue, different designs will be applied.
02:25The face of the upper part of the UFO has completely flipped, right?
02:30Now we have to make the lower part.
02:37They made the lower part by doing a lot of things.
02:41And some more tricks to install the engine in the lower part.
02:50That's it.
02:51That's it.
02:52The place to install the engine is also ready.
02:57Now, the two parts can be put together to make a complete UFO.
03:10Now, the work of the engine can also be finished.
03:12With that, the place to sit and everything else.
03:22It can be said that the complete work of the UFO is done.
03:26Now it has to be put in motion.
03:28But before that, let's give it a realistic UFO look.
03:34And some special motors are required to give it a modern look.
03:38So that it can open like a UFO with the help of a button.
03:46Keep in mind that the inside of it has to be relaxed.
03:49Some more machines have to be installed.
03:56Yes, you can say that it is now ready to move in the water even if it is not in space.
04:02Now let's put it in the water.
04:14Wow!
04:15I can't believe it's a homemade UFO.
04:19Wow!
04:37Wait a minute.
04:38I'll be back with this in a few minutes.
04:41But now let's take a look at this Octopus board.
04:45The boy who made the UFO board earlier, he also made it.
04:50From a distance, it may look like an electric octopus is riding a boat.
04:54It's not very interesting.
04:56So let's see how this interesting thing was made with a used engine and old equipment.
05:03To make this Octopus board, you have to restore an old and used engine many years ago.
05:09But this process is like seeing.
05:14Wow!
05:45Wow!
06:07Octopus's engine is ready.
06:08Now let's test it.
06:15Wow!
06:16Great!
06:20Now let's transform this board into a new one.
06:45The board is ready.
06:46Now we have to set two engines in this board.
06:51And after setting the engine, we have to make the octopus's hand.
06:55Let's make it.
06:56But this will also be made with some familiar tools.
07:15Now let's set the octopus's hands on the boat with the engine.
07:19But we have to do some testing.
07:29Wow!
07:30It's ready.
07:31But before that, let's do some tests.
07:37Let's go.
07:39Wow!
07:41Wow!
07:44Now we have to put it in the water.
07:46And let's see how it performs.
07:48Wow!
08:12No, this is not homemade.
08:14This hexapod was made professionally in a garage.
08:24First of all, this is the world's largest right-angle hexapod.
08:28It took one and a half years to make it.
08:31Even though it was made in a computerized way.
08:34But after that, there were different types of challenges.
08:38Like the first one was a very big challenge.
08:42It was also difficult to imagine how to operate it.
08:54This is a machine that can be operated in various ways.
08:57From hand-operated work to the work of an excavator.
09:01Everything was computerized from its design.
09:04The machine was operated by a computer.
09:11The engine used to heat up at the present time.
09:14That's why this sensor was brought.
09:16And the most difficult part was the hydraulic system.
09:27Suddenly, various problems were seen.
09:29It took a few more months to solve them.
09:35Finally, it was time to ride the hexapod.
09:38But at that time, its speed was not very good.
09:41So again, this machine had to be accelerated more.
09:54It took a few more months.
09:59Finally, the world's largest hexapod was presented.
10:04And then, instead of nowhere in the world,
10:07we saw a pumpkin falling in the background.
10:09It was super cool.
10:10We walked around the dirt, threw up some of our lawns.
10:21What do you think?
10:22Isn't it an amazing invention?
10:24Do you want one too?
10:25If you really want it, you can't buy it in the market.
10:28You have to make it yourself.
10:30That too, with all the things you have at home.
10:33Let's see how you can make this amazing invention
10:36with some of the things you have at home.
10:41First, you have to apply foam.
10:43You have to shape it like a boat.
10:50If you can, keep making it like a boat.
10:53The next step is how you can make it yourself with a pipe.
10:56See that too.
11:09Yes, you can also make a boat wing like this.
11:12Then set it up.
11:15The next step is to work on your old bicycle.
11:23You have to make a lot of space here for the hydraulic system.
11:29Then connect the hydraulic system you made with the bicycle to the board.
11:43After fitting it perfectly, you have to give it a finishing touch.
11:46You have to give it a finishing touch.
11:48You have to give it a finishing touch.
11:50After fitting it perfectly, you have to give it a finishing touch.
11:53Now connect the hydraulic system and test it.
11:56But yes, keep in mind that you have to have a powerful battery here.
12:01If you can do everything step by step like this,
12:04you can also make it ready and throw it away.
12:07What do you think? Will you make any of these?
12:20For more assistance, visit Dell.com
12:22The power to do more
12:25The power to do more
12:50The power to do more
12:53The power to do more
Comments