00:00Assalam-o-Alaikum.
00:02This is the $4.10 kit.
00:04This is the kit.
00:06This comes with an error.
00:08This is our E4 error.
00:10Let's see what this E4 error is.
00:12Let's check. I have turned it on.
00:14As soon as I turned it on,
00:16the E4 error
00:18is displayed on the display.
00:20This error
00:22is the error
00:24of the room sensor
00:26in the indoor kit.
00:28If this error occurs,
00:30the remote
00:32will not work.
00:34We have to turn it off from the back.
00:36The room sensor
00:38is this one.
00:40It is written here
00:42that if the sensor
00:44is faulty,
00:46the E4 error will occur.
00:48If the E4 error
00:50is cut off
00:52or the SMD
00:54is shorted
00:56or there is a problem,
00:58then the E4 error occurs.
01:00If we can check this,
01:02the method is that
01:04you have to see 5V here.
01:06If 5V is coming,
01:08then it is fine.
01:10If it is not coming,
01:12then check the SMD
01:14and the way to check the sensor
01:16is to put it here.
01:18The value of 8K should be shown
01:20on the meter.
01:22Now let's put it.
01:24If I turn on the kit
01:26and see whether 5V is coming
01:28or not.
01:30We have set the meter
01:32to 20V DC.
01:34Now I will put current.
01:36You can put series or direct.
01:38There is no issue.
01:40When E4 is coming,
01:42we have to check this.
01:44We are getting 5V.
01:46What is the problem in this?
01:48We will check this now.
01:50We will check the SMD.
01:52First, we will check this.
01:54I will put another sensor
01:56and check this.
01:58Now it is discharging.
02:00The light is blinking.
02:02You can discharge it yourself
02:04or let the relay
02:06discharge slowly.
02:08If you want to do it yourself,
02:10you can do it quickly.
02:12It has been discharged.
02:14When I put it again,
02:16I put it directly.
02:18The kit is on.
02:20F1 error has started.
02:22Let's check
02:24the error of F1.
02:26Let's check the error
02:28of F1.
02:30E4 was of this
02:32and F1 is of this.
02:34F1 is coming because
02:36the sensor is not
02:38applied here.
02:40The sensor is not discharged.
02:42I will put the sensor.
02:44Let's check the error of F1.
02:46F1 is not coming because of this.
02:48I am putting the sensor.
02:50I have applied the sensor
02:52here.
02:54E4 and now
02:56F1.
02:58What is the error of F1?
03:00It was the error of auto sensors.
03:02F1.
03:04Let's check the error of F1.
03:06I have not attached
03:08the compressor with it.
03:10Before that,
03:12let's check the error
03:14of F1.
03:16There is no error of F1.
03:18It was the error of F1.
03:20When we turn it on,
03:22it will turn on.
03:24There is no error of F1.
03:26If the compressor is not applied,
03:28it will give the error of compressor.
03:34We have cleared
03:36both the errors.
03:38If you have understood
03:40this video,
03:42I hope you watch it again.
03:44Subscribe to my channel
03:46and like my video.
03:50Goodbye.
Comments