00:00Hello Internet, in today's video we are going to make a mechanical horse, Alu Muscle!
00:07To make a mechanical horse, we need a cycle, so first of all we are going to take out both
00:16of its wheels, and here we are going to put two legs on it, and if we put two legs on
00:23it, the cycle will run like this.
00:25So, let's start!
00:31So, here we have taken out both the wheels, now we are going to build this, both the sides,
00:37the legs and the back, we are going to build these two together.
00:41So, here the building is done.
00:46This is going to move our legs up and down, and we are going to put the legs here.
00:53So, now let's build the legs.
00:55So, to build the legs, we have cut some pieces of wood here.
00:58These are two pieces of wood.
01:00Its length is 22 cm and its length is 15 cm.
01:03So, we are going to join them like this.
01:08Its length is 16 cm and its width is 6 cm.
01:11Here we have made two holes, one here and one here.
01:14These two have a distance of 2 cm.
01:16So, now we are going to put these two pieces of wood here.
01:19These are 16 cm in length and we have made four of them.
01:22So, we are going to put them like this, one on this side and one on this side.
01:27And we are going to put the same two pieces here as well.
01:36So, here we have joined them with a nut and bolt.
01:39You can see how easily it works.
01:41Now, we are going to put this in it.
01:44We have made one piece in the shape of L.
01:46Here we have made three holes, one here and one here.
01:49Its length is 17 cm and its width is 16 cm.
01:53Here you can see the L size.
01:55We are going to put it like this.
01:57We are going to put it like this between these two.
02:02So, here we have joined it.
02:04You can see how easily it works.
02:07We have put the bolts on one side only.
02:09We have not put it on this side because its connection will be in our cycle.
02:13We are going to fit it in our cycle.
02:16You can see one more thing here.
02:18Its thickness is very less.
02:20Because of this, its balance will not be there.
02:22So, we are going to increase its thickness.
02:24We have found a very simple solution for this.
02:26To increase its thickness, we are going to put small pieces in it.
02:29Two pieces on this side and two pieces on this side.
02:31So, its thickness will be approximately this much.
02:36Now, we are going to put it in our cycle.
02:38We are going to put it like this.
02:47Okay.
02:48So, we have put one leg.
02:50Now, we are going to put three legs like this.
02:52One here, one here and one there.
02:54So, here we have put our four legs.
02:57Now, we are going to connect the legs with the pedal.
03:00So, there is a piece of wood.
03:02We have made a hole on this side and on this side.
03:04And its total length is 42 cm.
03:07And its width is 6 cm.
03:10So, we are going to put it like this.
03:12We are going to put it like this.
03:14And this hole, we are going to connect it with this.
03:24This is also a piece of wood.
03:26There is a hole here and here.
03:28It is big according to this.
03:30And its length is 42 cm.
03:32And its width is 6 cm.
03:35Now, we are going to put it like this.
03:37We are going to put it here.
03:39And the other one, we are going to put it here.
03:42Now, you can see.
03:48You must have understood.
03:50Now, we are going to connect the other three legs.
03:52So, here we have put four legs.
03:54We have also connected them.
03:56And it is working properly.
04:01You must have understood.
04:04But there is a problem here.
04:06We have made a base of wood here.
04:08As the weight increases, it breaks.
04:11So, we have made a solution for this.
04:14We have made a frame of iron.
04:17We are going to remove this and put it like this.
04:21This will also be sorted out.
04:23So, let's put it.
04:25Okay.
04:26So, our mechanical horse is ready here.
04:28So, let's make it run.
04:37As you can see, it is working properly.
04:40Arun Basanti
04:42Subscribe
Comments