00:05I actually spent the best part of 18 years of my career here working almost every day at Lang Lang
00:11and it's been great to be back here with Jack. I'm a vehicle dynamics engineer and I have been
00:15for 28 years now I guess which is a really long run. So what I'm trying to achieve with the
00:23Jack
00:23Hunter is the integration and balancing of all the different components within the suspension system
00:28that they all work together nicely integrated as a complete system and give us the best outcome that
00:35we can achieve. Having worked predominantly in Australia through most of my career means that
00:41I'm very in touch with what is required on the Australian roads. We do have a bit of a unique
00:47situation where we've got a very large road network supported by a very small population and our roads
00:52tend to degrade a bit here and there and so tuning the suspension is a little bit extra challenge
00:57and managing both the big inputs that our roads have where we've seen subsiding in the road
01:04you know over the years but also the repair work that takes place on top of the road surface it
01:10puts
01:10in the high frequency content. So the specific conditions were focused on with the Hunter have
01:15been around the payload of the vehicle it's quite a serious ute with around 900 kilo payload and we've
01:21wanted that to be well managed by the suspension. The way the work normally takes place is it will
01:27evaluate the vehicle on the roads either here within the proving ground or out on the public roads as
01:31well. So this is subjective evaluation and it's critical thinking and it's just identifying the
01:37next obstacle to the performance that we're really trying to achieve with the vehicle and look at what
01:42we could or might change in order to try and improve that particular characteristic. Most of the work we do
01:48is on damper development shock absorbers shock absorber it is the most critical component in the entire
01:54suspension system. The shock absorber the damper does so much because it influences steering response
02:00and handling and ride comfort isolation motion control both when the vehicle is lightly laden or
02:06heavily laden. So we've been sent a good library of tuning components from Jack and these components
02:12have helped us try different experiments to see how the car responds to those different components.
02:16Achieving the the best outcome for the damper is it's pretty arduous we really chop through quite
02:23a few different iterations trying to balance out the compression and the rebound force so that the
02:28vehicle has a good balance in motion. Some of these changes we make are seriously minute you know
02:34changing the thickness of a disc by 0.05 millimeters or changing a bleed flow area by 0.02 square
02:41millimeters.
02:42We'll then test that on the dynamometer put it back on the car and then go and drive the vehicle
02:47again. On this vehicle we're now up to 14 different iterations of both the front and the rear damper
02:53so that means we've taken the dampers apart 14 times each front and rear so that's probably around
03:00about 50 damper rebuilds to get us to this you know final stage. The benefits of working here
03:06at Lang Lang are that there's a really great variety of roads I guess our favourite road is called the
03:12Ride and Handling Road and it's really quite a challenging road there's a lot of vertical inputs
03:17a lot of bumps and yumps to get over and it really challenges the car. There's also the circular track
03:22which is great we can run the car out to high speeds and there's a whole lot of other surfaces
03:26that
03:26we can use as well noise and vibration surfaces gravel roads I think there's something like just over 80
03:32kilometers of different roads here in the breeding ground. So the vehicle dynamics work that we've
03:37done here at Lang Lang is just one tooth in the cog really of the work that Jack are doing
03:42to develop
03:42the entire vehicle. The feedback and the specification we've developed here at Lang Lang becomes part of
03:49their greater integration and you know used by the Jack team to help them understand some of the
03:54different market requirements around the world. I think the level of testing that Jack is undertaking
03:58is testament to their interest in developing a vehicle that is suited to the Australian conditions
04:04and I think that's quite a big commitment. So I think what the hunter owner is going to get out
04:09of
04:09this vehicle is a versatile vehicle that's easy to drive but also something that is suited to the
04:15Australian conditions straight out of the box.