00:00If you're filling soda bottles, topping off paintball tanks, or building your own HPA setup,
00:04you already know the adapters cost more than the gas half the time.
00:08So I dug through the listings and pulled the best HPA fill station adapters under 12 bucks real ones,
00:14thousands sold, ratings that hold up.
00:16Here's the 5 I'd actually buy.
00:19First up, the Keglan Soda Bottle Cylinder Adapter, CGA 320 Standard,
00:24and it's the one with a built-in bleed valve.
00:26That bleed valve is the whole reason it's here, you crack it open, vent the pressure, then disconnect.
00:32No surprise pop, no fighting is stuck fitting.
00:36$10.21, over $4,700 sold, 4.5 stars.
00:41If you bottle carbonated water, this is the safe boring choice.
00:46Next, the Aluminum Alloy Soda Refill Adapter, TR21-4 to CGA 320.
00:52This is the cheapest thing on the list at $8.87, and it's also the highest rated near the top,
00:584.8 stars off almost 4,600 sales.
01:01Light, Aluminum Alloy, and TR21-4 to CGA 320 is exactly the thread combo you need for the standard
01:08threaded soda bottles.
01:10Cheap, simple, does one job.
01:13Hard to argue with that.
01:15Number 3, the CO2 Refill Charging Needle Adapter, $9.80, $3,300 sold, and a perfect 5 stars.
01:23This one's the needle type, so it's made for refilling disposable CO2 cartridges from a big
01:28tank instead of tossing them. If you go through those little cartridges constantly, this thing
01:33pays itself off in about a weekend. 5-star rating with that many sales is not an accident.
01:39Then we've got the HPA CO2 Tank Fill Station Adapter with the fitting set, CGA 320, G3 quarters,
01:46W21.8 nut and nipple, plus an 8mm quick disconnect coupler.
01:52$11.83, $2,700 sold, 4.7 stars.
01:57This is the one for people with more than one tank standard, because you're basically getting
02:01a fitting kit plus that quick disconnect. If you don't know which thread your tank has,
02:06buy this one. Last, the HPA Scuba Air Tank Adapter, G1-2-14, with pressure regulator test
02:14fittings. $11.25, $2,200 sold, and another 5-star rating. G1-2-14 covers the scuba and air tank
02:23side
02:23of things, and the regulator test setup makes it easy to check pressure before you fill.
02:28If you're running scuba or air tanks rather than CO2, this is your pick. Every link is in the
02:34description, and they're all sitting under $12 right now. One thing though, these are pressurized
02:40fittings, so always check the thread match, don't mix standards, and bleed the line before you
02:45disconnect anything. If this saved you some time, hit like and subscribe, and I'll keep hunting the
02:50cheap gear that actually works.
