00:00If your bike's been sitting in the garage with a nest of chewed-up butt connectors and flickering turn signals,
00:05this one's for you.
00:06I dug through the listings and found the best motorcycle wiring repair crimpers under $16.84, so you don't have
00:13to solder in the rain ever again.
00:15First up, the crimping tool pliers with alloy jaws, SN2546B, 58B, 02C, 03H, 06WF, X6, 06 and 48B is compatible,
00:27jaw slot width 4mm.
00:30$4.82.
00:32That's the cheapest thing on this list and it still pulls a 4.9 from almost 4,800 buyers.
00:39The alloy jaws swap out, so one handle covers terminals you'd normally need three tools for, and a 4mm slot
00:45seat standard motorcycle bullet and spade terminals clean every time.
00:49If you're building one bike and want to spend your money on tires instead, buy this one.
00:54Next, the crimping tool for DuPont, JST, and Molex terminals, plus non-insulated and pre-insulated ferrules, but connectors, and
01:02even solar and Koch's connectors, sold as the SN58B, 2549 and 2546B family.
01:11This is the Swiss Army knife of the group, it's the one I'd reach for if I'm rewiring a whole
01:15harness, because the jaw set crosses over from tiny DuPont signal pins all the way up to Koch's.
01:214.8 stars, 4,600 sold.
01:24If your repair involves anything besides plain wire, this covers the odd connectors the cheap tools choke on.
01:31Third, the SN2549 ratcheting wire crimping plier for JST PH 2.0mm, XH 2.5, VH 3.96, JWPS 4
01:41.0mm pitch, and DuPont terminals.
01:449.17.
01:47Here's the thing nobody tells you, JST and DuPont pins are crimped on the insulation and the conductor separately, at
01:53different jaw depths, and a generic plier will flatten them into a blob that won't click into the housing.
01:58This one is cut for those exact pitches.
02:014.8 stars across 3,800 buyers.
02:05If you're fighting connector housings that won't lock, this is your tool.
02:10Fourth, the ratchet crimping tool SN58B pliers kit for XH 2.54, DuPont 2.54, 2.8, 4.8, and
02:186.3mm, uninsulated in ferrule terminals, covering 0.25 to 1.5 square millimeters, or 23 to 16 AWG.
02:2715-23.
02:29The ratchet mechanism is the whole point here, it won't release until you've hit full crimp pressure, so you get
02:35the same squeeze every single time instead of a loose one every fifth connector.
02:392,200 sold, 4.8 stars.
02:43Worth it if you've ever had a crimp pull apart on a bumpy road.
02:47Last, the SN02C wire crimping tool kit, AWG 23-13, bundled with 280 pieces of insulated wire electrical connectors, but,
02:57ring, spade and cable lugs.
03:001470.
03:01This one's for the guy starting from zero.
03:04You get the tool and every insulated connector you'll need for a full bike harness in one box, and the
03:09AWG 23-13 range covers the fat charging wires and the skinny signal wires the same.
03:162070 sold, 4.8 stars.
03:19Best value if you own literally no crimping gear yet.
03:23All five links are in the description, cheapest first, so pick your budget and go.
03:28If this saved you a trip to the auto parts store, hit like and subscribe, more wiring and garage gear
03:33breakdowns coming.
03:34.
03:34.
03:35.
03:35.
