00:00Hey everyone, welcome back to the channel.
00:03So I went searching for 99.99% pure tellurium metal lump for semiconductor,
00:08and let me tell you, the search results were, creative.
00:11But in the middle of all that, I found 5 deals that are genuinely worth your money,
00:16and one of them actually has real tellurium copper in it.
00:19So grab a coffee, and let's get into it.
00:22Number 1 is the priciest pick on the list, but it earns every cent.
00:27This is a Hi-Fi XLR male-to-female AES digital signal cable,
00:31running a Jensen 6N pure silver conductor into rhodium-plated tellurium copper plugs,
00:36and yes, that's your tellurium connection right there.
00:39Tellurium copper is what high-end connector makers use because it machines cleanly and holds a tight,
00:44low-resistance contact that doesn't loosen up over time.
00:47You also get a white carbon fiber shell, which looks fantastic.
00:52It's $137.09, with over $3,500 sold and a 4.8 rating.
00:58If you're running AES digital, this is a buy-it-once cable.
01:02Number 2 is an absolute steal at $3.52.
01:07This is a 40mm CNC knurling handwheel with a 10mm rotating handle,
01:12built for sliding tables, screw rods, and stepper motor positioning.
01:16The knurled edge gives you grip for the coarse moves, and the rotating crank handle lets you
01:20fine-tune without your hand slipping off. It's got a 4.9 rating with 68 sold.
01:27Honestly, this is the kind of small upgrade that makes a homemade machine finally feel like a real
01:32machine. Number 3, $3.34 an ER11 spring collet, and these come in ER11, ER16, and ER20 sizes with a
01:411-13mm range, plus 1-8, quarter, and half-inch shanks. High precision, so your run-out stays
01:48tight and your engraving bits and end mills actually cut true instead of wobbling.
01:524.9 stars, 66 sold.
01:56If you're running a CNC router, an engraver, or a mill, you can never have too many collets,
02:01grab a few sizes while they're this cheap.
02:03Number 4, $1.85.
02:06These are M6-M20 handwheel screws and handles with black Bakelite grips, and you can get them in
02:12revolving, fixed, or foldable styles. The foldable ones are my favorite, because they tuck right out
02:18of the way while the machine is running. Bakelite gives you a solid grip that doesn't get slippery
02:23with oily hands. 4.8 stars, 58 sold.
02:28At under $2, just buy a set and stop hunting around the shop for the one handle you're missing.
02:34Number 5, $5.83.
02:37This is a CNC turning tool pin and shim screw set, hex socket doublehead screws in CTM-510,
02:43CTM-613, 618, CTM-822, and CTM-1022 sizes. These are the little screws that lock your inserts
02:52into the tool holder. The second one strips or disappears, your whole setup is dead in the water,
02:58so keeping spares on hand is the cheapest insurance you'll ever buy.
03:024.7 stars, 52 sold. Trust me, you want these before you need them.
03:08Note, not part of the script none of these 5 listings is actually a tellurium metal lump
03:13only the XLR cable uses tellurium copper. I framed it that way so the script stays honest,
03:19but if you need the video to literally match the title, you'll want to swap in actual tellurium
03:23listings.
03:24.
03:24.
03:24Terima kasih.
Komentar