00:00If your prints are coming out with those ugly step lines, you know, layer shifting, there's a really good chance
00:05your belts are the culprit.
00:07Stretched, loose, or worn out belts are one of the most common reasons for it, and the fix is usually
00:12cheaper than you'd think.
00:14So today I've rounded up the top 5 timing belt kits for layer shifting that people are actually buying and
00:19loving right now.
00:21First up is the Pouch 2M GT Open Timing Belt, and this one's great if you'd rather cut your belt
00:26to the exact length you need instead of hunting for a specific size.
00:30It's available in 6, 9, 10, and 15mm widths, and Pouch specifically designed it to run with low dust and
00:36low vibration, which matters a lot when you're chasing down print artifacts.
00:41At $11.99 with a 4.9 rating and over 4,400 sold, it's a solid, proven pick.
00:49Next, if you want the simplest possible fix, this closed-loop 2GT belt is the one.
00:54It comes in perimeters from 198 up to 300mm, so there's a good chance your printer's exact size is in
01:01there somewhere.
01:02It's rubber, it's got clean GT2 teeth, and honestly the best part is the price, just $3, with a perfect
01:085-star rating and 4,393 sales.
01:12For that kind of money, it's almost a no-brainer to grab a spare.
01:17Now, if you're running a Creality K1 or K1 Max, this pouch kit was basically made for you.
01:23You bit the two GT 7.7 open belts plus 22 thidler pulleys with a 4mm bore, so you're replacing
01:30the belts and the pulleys in one shot, which is exactly what you want, because one pulleys will chew up
01:35brand new belts.
01:36It's $32.99, rated 4.8, and with 4,385 sold, K1 owners clearly trust it.
01:44Coming in as the cheapest option on this list is this GT2 closed-loop belt at just $1.78.
01:51Same deal as the others, lengths from 198 to 300mm, widths of 6, 10, or 15mm, rubber construction, proper 2M
02:00teeth.
02:01It holds a perfect 5-star rating across 4,305 sales, which tells you people are happy with what shows
02:08up.
02:09If you just need one belt to get your printer back in action, this is the budget hero.
02:14And last but definitely not least, this belt tensioner setup is a little different, it's not just a belt, it's
02:20a full tensioner for the X and Y axes on Ender 3, V2, 5, CR10, and 10S machines.
02:26That's huge for layer shifting, because even a good belt will shift if the tension isn't right.
02:31It stretches and straightens the belt properly, and at $7.43 with a 5-star rating and 3,816 sold,
02:39it's a smart upgrade to pair with any new belt.
02:42Alright, that wraps it up all 5 of these links are down in the description below, so go check them
02:47out and pick whichever fits your printer.
02:49If this helped you out, drop a like and hit subscribe, because it really does help the channel.
02:55Thanks for watching, and happy printing!
Komentar