00:00So you finally got your laser engraver dialed in, you're cutting clean, you're engraving sharp,
00:04and then you hit that wall where the machine itself is holding you back.
00:08I've been down that road, and honestly, the right accessory changes everything.
00:13So I went digging and found the 5 upgrades that actually made a difference in my workshop
00:17plus the best deals I could track down on each one.
00:21Let's get into it.
00:23First up, the Acmeer M4 Chuck Rotary Module.
00:26This is the one that opens up a whole new income stream, because suddenly you're engraving tumblers,
00:31wineblasses, ring bands, even little spheres.
00:35It's a 4-in-1 setup with 360-degree rotation, so instead of buying three different jigs,
00:40you swap attachments and you're done.
00:42It runs about $92, which sounds like a lot until you realize a single batch of personalized tumblers
00:48pays for it.
00:50Nearly 5,000 sold and sitting at a 4.8 rating, people are clearly using these hard and still
00:55loving them.
00:57Next, and this is the one I tell everybody to buy first, the Tybok Honeycomb Workplate.
01:0210 bucks.
01:04That's it.
01:05$10 to stop scorching the back of your projects, protect your table, and get way better airflow
01:11under the cut so your edges come out cleaner.
01:13You get the 400x400 plate plus a flexible 200x200 bed, so you're covered for small stuff
01:20and bigger panels.
01:21It's got a perfect 5-star rating across almost 5,000 orders.
01:26If you own a laser and you don't own a honeycomb, fix that today.
01:31Now, if you want your cuts to go from okay to genuinely clean, you need air assist and
01:35the Acme or C4 pump is the sweet spot.
01:3830 liters a minute with an adjustable flow knob, so you can crank it up for cutting plywood
01:43and dial it back for delicate engraving without blowing debris everywhere.
01:47It blasts smoke out of the kerf, which means less charring, fewer flare-ups, and a lens
01:51that stays clean way longer.
01:54$47, universal fit for basically any CNC or diode laser, and another perfect 5-star rating.
02:01This is a safety upgrade as much as a quality one.
02:05Number 4 is the Little Unsum Hero, the Acme or Heightening Column Set.
02:09It's a metal leg extension kit, and it does two things.
02:13One, it lifts your frame so you can actually fit a rotary module underneath without the
02:18gantry crashing into your tumbler.
02:20Two, it gives you clearance to engrave taller objects you couldn't reach before.
02:25It's $17.
02:27$17.
02:29And if you bought that M4 rotary I mentioned earlier, you basically need this to use it
02:34properly.
02:35Solid metal build, 4.9 stars, easy win.
02:39And rounding out the list, the Algo Laser Lightburn Camera.
02:43This is the upgrade that saves you material.
02:46Instead of eyeballing your placement and doing test burns on scrap, you mount the camera,
02:51see your workpiece live inside Lightburn, and drag your design exactly where you want
02:55it.
02:56First try, every time.
02:58It also lets you monitor the job remotely, which is really nice when you're running a
03:02long cut and don't want to hover over the machine breathing fumes.
03:06$74 works with order, off-row, two trees, and more, and it's got a flawless 5-star rating.
03:13Alright, that's my top 5.
03:15All the links are down in the description, and I've matched them up with the best prices
03:19I found, so go grab whatever's missing from your setup.
03:23If this helped you out, hit that like button, and subscribe for more laser and maker deer
03:27breakdowns.
03:29Thanks for watching, and happy engraving!
Komentar