00:00So, I finally got around to sorting out the irrigation system in my backyard,
00:04and let me tell you picking the right solenoid valve is way more confusing than it should be.
00:09Voltages, thread sizes, brass versus plastic, it's a lot.
00:13So I did the digging for you. These are the top 5 solenoid valves for water control right now,
00:19all with thousands of real buyers behind them, and I found the best deals on every single one.
00:24Let's get into it.
00:26Kicking things off is the heavy hitter, this normally closed brass solenoid valve that comes
00:31in 3 8ths, 1 1⁄2, 3 quarters, and a full 1 inch. What sold me here is the IP65 rating
00:37on the coil,
00:38which basically means rain, dust, and splashes aren't going to kill it.
00:42And it's not just for water, it handles oil and air too, in either 12 volt or 220 volt.
00:48It's the priciest of the bunch at around $158, but with nearly 5,000 sold and a 4.9 rating,
00:55this is the one you buy when you need it to just work for years and never think about it
00:59again.
01:00Genuine industrial-grade stuff.
01:03Now, if that made your wallet flinch, check this one out.
01:07This is the plastic electromagnetic valve with a G3-4 inlet and, here's the cool part,
01:12one inlet splitting into four separate outlets.
01:15So instead of buying four valves and four fittings, you've got one compact unit doing the whole job.
01:20It runs on 12, 24, or 220 volts, it's normally closed, and it's perfect for washing machines,
01:27water dispensers, or a small drip irrigation setup.
01:31And the price?
01:33$20.49.
01:3620 bucks.
01:37It's got a perfect 5-star rating from almost 5,000 buyers, which honestly you almost never see.
01:44Sitting right in the sweet spot is this brass electric solenoid valve in G1-slash-2-inch,
01:49available in either 220-volt AC or 12-volt DC.
01:53The big selling point here is that integrated design, the coil and body are built as one clean
01:58unit, so there's less to come loose, less to leak, and installation is genuinely a 5-minute job.
02:04Brass body means it'll handle hot water and won't crack on you in the cold.
02:08It's about $73, and with over 4,800 sold and a 4.9 rating, this is the one I'd recommend
02:15to most
02:15people doing a home project.
02:18Number 4 is the flexible one.
02:20This is a half or three-quarters-inch male thread valve, and what's different here is you can get
02:25it as normally closed or normally open, which matters way more than people realize.
02:30Normally open means if the power cuts out, your water keeps flowing, normally closed means it shuts
02:35off. Depending on whether you're protecting a pump or preventing a flood, that choice is
02:40everything. It runs on 220, 12, or 24 volts, it's 4,395, and with 4.8 stars from over 4
02:48,000
02:48buyers, it's a solid, honest middle-of-the-road pick. And rounding out the list, this half-an-inch,
02:54220-volt normally closed brass magnetic valve. This one's about as simple and dependable as it gets
03:01no options to agonize over, no wiring puzzles. Plug it into mains power, it stays shut until you
03:07energize it, and that's the whole story. The solid brass body handles decent pressure,
03:12and it's a really popular choice for garden taps, aquarium top-offs, and boiler systems.
03:18It's around $73 with a 4.9 rating. If you already know you need 220-volt and half-inch,
03:25honestly, just grab this and move on.
03:28Alright, that's my top 5. All the links are down in the description with the current best
03:33prices, so go check them out. If this helped you out, smash the like button and subscribe,
03:39I've got more practical gear breakdowns coming.
03:42Thanks for watching, and I'll catch you in the next one.
Comments