long card Inverter output problem repairing | power inverter repair

Title
long card Inverter output problem repairing | power inverter repair | inverter repairing

About
hello doston khempur repair channel Mein aapka bahut Swagat hai Doston Aaj mere pass mein yah Laung card mein inverter repairing ke liye aaya hai aur is inverter mein problem yah Hai Ki iski output Nahin a rahi hai light Mein Lagane per Sahi chalta hai aur inverter on karne per Nahin chalta hai yahi ismein problem hai inverter work nahin kar raha hai to doston ismein kya problem hoti hai Maine is video mein bataya hai isliye video ko pura Dekhen video Pasand Aaye To video ko like aur share Karen aur is video Ko Dekhkar Apne inverter ko repair kar le thank u

Instagram
https://www.instagram.com/khempurrepair/

playlist
Long Card Inverter https://dailymotion.com/playlist/xaw282

#khempurrepair
#inverterbord
#inverter
#inverterrepair

Transcript

00:00Hello, friends, I am very excited to have you today.

00:03Today, we have a inverter.

00:06When we have a inverter,

00:08it will work.

00:09And then, 1-2 minutes later,

00:12it will be closed.

00:14So, the inverter is normal long card.

00:18You can see here,

00:20the inverter is long card.

00:22And then, the problem is,

00:24that when we have a hand,

00:26it is hard for a sec,

00:27and then, a couple hours will change.

00:29After, the control is on,

00:33and it will drop now,

00:34when we start with the low battery,

00:34it will turn off.

00:37And then, the power of the battery is on.

00:38It will not be,

00:38it will change the AC,

00:40or not the charge.

00:42So, now, I will open the inverter,

00:45and notice,

00:46which is why this is happening.

00:49Do you know,

00:50there will be a inverter from here,

00:54This is the battery wire.

00:55Now, I will show you what the problem is.

01:00When we turn on,

01:03we turn on this way.

01:05This is a blink and beep.

01:07If we turn on this way,

01:10we turn on this way.

01:13we turn on this way.

01:24Now, if you are inviter,

01:28I will share this way.

01:28If you are inviter,

01:33we will put that back onto the power line.

01:36Then, after this,

01:38I will put it back to the power line.

01:39And then,

01:42here I will put it back.

01:45So,

01:46this will make an output.

01:48If this is the power line given,

01:50or not?

01:53we were involved in this mode.

01:56Now, we are putting it to the inverter.

02:00Now, we can do the inverter now.

02:02Now, we can do the inverter now.

02:05If we go out, we can do the order.

02:05So we can do the inverter.

02:07So, the power now leads us to the output.

02:12But, if we move this inverter now,

02:16then we can do the same.

02:17So, the low battery is all the problem.

02:19इसमें आ रही है ठीक है तो दोस्तों ये problem low battery की है और ये problem losing की भी

02:25हो सकती है ठीक है ये inverter की problem है तो इस वाले jack का तो कोई मतलब है नहीं

02:30ये तो अगर charging में कोई दिक्कत आती है तब इस jack को हम देखते हैं ठीक है सबसे पहली

02:35चीज़ आपको यही देखना है इसके बाद में आप

02:38आपको यहाँ पर heat sink जो आप देख पा रहे हैं यहाँ पर इस screw को भी check करना अच्छी

02:42तरीके से और एक यहाँ पर आपको और मिलता है bolt यहाँ पर ठीक है यह वाला ठीक है तो

02:48इसको यहाँ पर भी आपको check करना है कि यहाँ पर भी losing तो नहीं है ठीक है तो दोस्तों

02:53अब अ�

03:07से आसान तरीका है वो तरीका यह है कि आप digital meter या फिर multimeter ले लें यहाँ पर आप

03:15उसकी minus की wire लगा दें ठीक है मीटर को 12 वोल्ट पर आप कर लें और यहाँ पर minus

03:19की wire लगा दें और आपकी जो red color की wire है plus वाली उस wire को यहाँ पर इस

03:25tip पर आपको यहाँ पर चार नंबर पर इस

03:37marma है और यह दें आ और है कि यहाँ पर 12 वोल्ट आरहे हैं यह नहीं आ रहे हैं

03:41ठीक है अगर नहीं आ रहे हैं तो आप समझे सकते हैं कि inverter में हमारे

03:45Golf नहीं आरह है जिसकी वजह से यह problem आ रही है लेकिन अगर मान लीजे यह वोल्ट आ रहे

03:50हैं तो फिर आप इस अक

03:58This is the first one that we can see in the next few months.

04:02So we can see the result.

04:05If you have to do this, you can see the result of the result.

04:08This is the result of the result of the result.

04:17Here we have to put this here on the ground.

04:22Here we have to put this here on the ground.

04:27You can see that we have to put this here.

04:33When we have to put this here on the ground,

04:37this is the dry solding.

04:38Now you can see that you can see this tip of the volt.

04:43If you will see this tip of the volt,

04:45then here we will check the volt.

04:53Then we will check it out.

04:54And this tip of the volt is here.

04:58This way you can see this.

05:00The ground prop here is here.

05:03And the plus prop here is here.

05:06And then the volt check the volt.

05:08So you can see that here.

05:10So here we have 14 volts.

05:12It means that our plus volts are good.

05:16Now what do we do?

05:17We have to keep here.

05:19Now we have minus volts check.

05:22So minus volts here we can see.

05:26You can see that one volt is not coming.

05:28What do we do?

05:30We have to keep here meter problem.

05:31Or here pin in the problem.

05:35This screw is in place.

05:36I will open the kit.

05:37I will open it.

05:54So here we can see that our wire is wrong.

06:02This wire is wrong.

06:03If you have to remove it.

06:06You can see here.

06:08This wire is broken.

06:10This wire is wrong.

06:13The light is not right here.

06:16This wire is losing.

06:17here you can see

06:22this is a carbon

06:25here I cut this

06:27here I have

06:31this is a soldering

06:32so that this is a good way

06:35PCB

06:36here I have

06:42this is a good way

06:44this is a good way

06:46you lose not to the side

06:47now we will fit

06:50and check that

06:51this is right

06:52or there will be no problem

06:54here

06:55this is a good way

07:12I have to put it in a strip and here I have to put it tight.

07:16I have to put it on.

07:18Now, we have to look at it.

07:21Inviter is on.

07:23I have to put it on.

07:24I will put it on to you.

07:29Okay, my inverter is on.

07:35Inviter is on.

07:36If this is something, I will put it on.

07:40Now, we can see it on.

07:43So, man can do it.

07:45You can see it on.

07:47Inviter is on.

07:48Inviter is on.

07:50You can see it on.

07:54It is on.

07:56It was on.

07:59Inviter is on.

08:01if you have any problems then you can ask me comment box

08:04for this video.

08:07Thank you very much for watching.

long card Inverter output problem repairing | power inverter repair | inverter repairing

Category

Transcript

Comments

Recommended