00:00Hi, okay, in this video I will give a tutorial on how to expand the signal.
00:07WiFi using this device CPE220 TP-Link Okay like this this is the CPE220 which
00:14The signal is very strong, this is the admin-admin setting. Okay, here we get two.
00:24two devices, two holes, just plug the electricity into the city's POE and
00:31lights up if it's on, connect the LAN cable, you can make your own cable or buy it at
00:38Tokopedia for the cable, how to make it can also be checked in the description link for making the cable
00:45connect in this POE section POE in Okay it's on if it's on like this next
00:55you can reset it here on the CPE device or in the POE city for this POE city for
01:03The reset is done indoors, while the reset is done on the POE device if you place it outside.
01:09room or outdoor because I am indoors or indoors I reset it using via
01:16You hold this POE media for a few seconds, okay, and it appears like this and comes back again, that's the sign
01:24It has been reset. If it has been reset, just add the cable again and connect it to
01:33This POE section is the LAN plug, you plug in the LAN plug, it can go directly through the CPE for outside
01:45this room, while the LAN one has the POE in the room like this because I am inside
01:53I use the indoor room directly on the POE and connect it to the laptop
02:01If it is connected to the laptop, just go to the settings menu and select
02:07Control Panel, select Network, Internet, Network and Sharing Center, select Change Adapter Settings.
02:18ethernet right click properties
02:22Select IP4 properties and enter the device IP from jpe.w. This computer device's IP address is 0.
02:33Hi, the 0 device location was 254, this is the default from the factory itself.
02:40OK, like this 254 OK and close the case, the data is connected to your internet contacts, open Chrome
02:48Hi, enter this IP address jpe.20 254
02:54Hi Okay then enter admin admin
03:01this selects the country of America
03:10OK, you guys make the login again, it's not the same as the admin login, the username remains the same, it's okay, the admin password must be
03:18changed
03:21OK, if it's set up like this, just go to the Quick Setup section. Here we will use it.
03:28This repeater is used to expand the WiFi signal without creating a new WiFi, while for BridgeGal itself
03:36In BridgeGal, we can spread WiFi signals by using the WiFi name we want and the password.
03:44OK, since we are using a repeater, this time we will test using a repeater, we will choose a repeater
03:50and the IP address must be the same as the IP you want to target or the one you want to spread the WiFi signal to.
03:56his
03:56Hi, here I will try to connect to WiFi SSID 1 because the signal is very minimal, very small.
04:06Okay, I will spread the WiFi signal or expand the WiFi signal from this SSID 1.
04:11this signal is only 0 yeah 0 sometimes 1 we will try to
04:16widen or expand the signal so that it can enter this house my neighbor's wifi
04:23This SSID 1
04:26First, you first connect SSID 1 to see the IP address of the internet source gateway to which we will distribute the internet
04:37OK, if you're connected, download an application called WiFi Main on the Play Store to see the IP address of the internet source.
04:45This SSID 1
04:47okay you can go to the discovery section
04:51to start scanning the wifi, okay, this JTE Corporation is the gateway for internet sources from
04:58wifi that we will distribute the internet signal
05:02okay okay 1.1 this means you forgot the zero part you replaced it with the number 1
05:10This is still 254 then next select survey and look for the SSID 1 wifi signal or the wifi signal you want
05:21want to spread the signal
05:26we will expand this signal
05:30OK, and don't forget the WiFi password must be the same
05:36Okay
05:39If you have entered the WiFi password from SSID 1, you also need to fill in the distance.
05:44next and finish
05:45just like this
05:47We can immediately access the internet. We will test the internet directly using this cellphone. You can see for yourself that the signal is still 0.
06:00or 1
06:00We wait a few minutes until the router restart process is completely finished.
06:13Okay
06:13OK, it's starting up again and look at the signal, it's full right away, okay?
06:19so we can go straight to the internet
06:23So you don't need to worry anymore about the internet or the weak signal, the signal will be strong and full because we have expanded the signal.
06:34okay okay look the SSID is full, there was only one before
06:39the internet can also run smoothly like this
06:45okay success
06:48The next step is to test the internet connection on the laptop and it will be the same.
06:56OK, we can connect the laptop now. I'll unplug it.
07:00we only connect the cable to WiFi SSID 1 connect
07:10OK, the signal is full and can connect.
07:13Now test your internet connection
07:15okay we can connect too on
07:18jpd20 for
07:21The modem accesses the modem, the internet source can also be JTE from Indihome
07:26so we can access the modem and internet via computer too
07:33jpd20 can also be like this
07:36both can be used for the internet
07:38the signal is also full
07:42OK, maybe that's enough for this video.
07:44for next we will try to test Bridge Girl mode
07:48what's it like don't forget to subscribe immediately so we don't miss out
07:51enjoy!
07:52enjoy!
Komentar