00:00Hi, okay, in this video I will give a tutorial on how to set up WiFi on TP-Link.
00:10This jpe220 is an outdoor access point that is waterproof and can be used outdoors.
00:16OK, the JPE220 model, the IP settings and login are already here.
00:24OK, let's just go straight to the method, first we open the lid here we see there are two LANs, this is also straight away
00:33You just plug the power into the PoE like this, then you connect it with a cable to use it.
00:43You can buy the cables or install them yourself. Insert the cables into the plug.
00:50This PoE section is to turn on the JPE220 device here, which means on LAN 0, yes, this PoE-in
01:04You enter it there, if it's entered like this, the indicator will light up, that's a sign
01:14This device is already active or already on after that we can reset it, you can reset it here
01:21This is for outdoor use if you put it outside or in the POE here, this is for indoor use so it's not complicated
01:29I will reset it, I just need you to look for a small item like this, then hold it for a few seconds.
01:38until the signal is successful then it comes back again, the question is whether the reset has been successful if it has been successful
01:46reset it directly, just plug the cable back in, you can have two LANs on this PoE for
01:53indoor usually and the one on the device is for outdoor you connect it to the laptop part
02:00another laptop laptop for the process of starting the settings if it is plugged in like this
02:08Let's just set it up, go to the Windows control panel, look for the control panel
02:15Hi OK, if you have control panel then go to the network and internet section then by network and sharing
02:24setting center and sing adapter setting then select ethernet right click properties select dcp4 ini ip4
02:32Right click properties then enter the IP like this, it's up to you what your computer's IP is, the important thing is
02:39The default gateway is the same as the dcp220 dcp2254 device, okay, then okay, okay, okay, that's it
02:51successfully connected, open Chrome browser or others also work, I use Microsoft Edge
02:57then enter the IP of the dcp220 device, namely 0254, this is OK if it is done then you enter the name
03:07The username is admin, the password is admin, just choose an American account so the signal is stronger.
03:17OK, login. If you've logged in, create a new password, don't use the same password as the admin.
03:27different for the username, it's okay with the admin, then finish after that go to the Quick Setup section
03:35OK, to set the WiFi, select the access point mode first. Here we will see the function of
03:45This access point is next, here you have to set the IP address to be the same as the source.
03:51This internet is 0254 okay and the internet source is Telkom Indium jtef609
04:03OK, to see the IP of this device, you can download it on this cellphone. It has connected to SSID 1 and has Indium WiFi.
04:12This
04:12You download wv-man then open wv-man to see the gateway IP address of this internet source.
04:20select discovery and look at the gateway and 8.1.1 okay, I've found it, come back here, fill in for
04:29Your device number will change to this one, whatever, behind this I will fill in 33
04:36OK, then next, here you fill in the name of the WiFi you want, I named it computer X and the password
04:45Fill in the WPA2 password as desired
04:53OK, the distance is up to me, I chose number 27 km, then next, and when we finish, now we try to
05:04connect wifi computer X
05:07OK, I will connect this first using a smartphone
05:24okay connect wifi computer X
05:30Look here he can't connect because he hasn't connected to the internet
05:40OK, I've connected the password, but it doesn't want to connect to WiFi because it hasn't received an IP from the internet source.
05:47it's still like this, we have to connect the cable from the internet to the device first
05:54jp220 okay, this is the device, you guys connect the cable again
06:00It's up to you to plug it in, part number 123 is up to you, the important thing is that you plug it in first to the internet source, the cable is like this
06:11okay then in this other part you remove it
06:16okay, just remove this other part
06:28OK, I'll remove the other part and then you plug in the cable that was plugged into the internet source, namely the indium.
06:39okay, this is a new cable, look, it's different, there's a cluster
06:43this is the internet source i will plug it in like this
06:47OK, it can be used for internet, we will test it now.
06:52okay we connect computer X the password is 12345678
07:05OK, OK, it's connected, let's test the internet connection.
07:25okay, successfully connected
07:26okay we test to connect the computer
07:31we test to connect
07:33we test to connect the computer
07:41we test to connect the computer
07:43Now we enter JPD20
07:48Okay, it worked too
07:52Okay, to connect to JTE or the internet source can also be connected
08:00OK, now we'll try to test the internet connection.
08:08We will try to open YouTube to see if it works.
08:18OK, you can see for yourself that you can now connect to the internet.
08:26Okay, YouTube is also possible
08:30OK, now the USB can open the internet.
08:34Now I will try it on my cellphone too
08:39Okay, you can also use the internet on your cellphone
08:42Succeed
08:46Okay, maybe that's enough for this video tutorial.
08:49Don't forget to subscribe so you don't miss the latest tutorials.
08:54That is about the client we will try later
08:57Thank You
08:58See you in the next video
Komentar