00:00Hi hi okay in this video I will give a tutorial on how to set up
00:09Hi access point jpe210 from tp-link paros jpe210 and this is the ip and then the username and password are admin
00:19Admin Okay, let's get straight to it. First of all, plug in the PoE. This is called PoE for power.
00:25Hi, you put it in and the light is on, which means the PoE is active, then you put it in.
00:35or plug in the cable n this bp-boe Hi, you guys plug in the PoE with this cable, yes, this blue cable so that
00:47no mistake, later I will plug the PoE into the cable in the PoE and then into the device too
00:57You connect it like this and then the indicator lights up, that means the access point is active.
01:04then we will reset first for the initial settings, you hold it using a wire or
01:12It's up to you to hold it until the indicator is full like this and then it goes back, that's a sign of an access point.
01:22successfully reset after that we plug the cable into the LAN section. Okay, this is the LAN section to connect to.
01:33computer or laptop Okay, I've connected this to the laptop to set the settings. Okay, it's active.
01:48then go straight back to your laptop, go to start then type control panel
01:57Go to the network and internet section, then the network and sharing center section, then change adapter settings.
02:06After that, right-click on the Ethernet section, then properties, then select IP4 DCP and set the IP to 192.168.
02:23dd0 is the default gateway, namely the device number of the access point itself, which was 254.
02:31You enter it like this then OK and OK OK, successful connection if you have successfully connected to the access point
02:41You open Chrome or another browser, here I use Internet Explorer because Chrome is not yet available.
02:48I installed Hi to you guys go to the IP 0.254 Hi like this Hi then you enter Hi to this
03:06arrangement
03:07Initially you enter admin-admin Hi and for the region, just select America so that the signal...
03:13because the signal is more stable and stronger, okay, always log in. Hi, after you log in, you make
03:24again the password the password the password this cannot be the same as this admin-admin I see the password
03:31Hi then finish Hi if it's finished like this just go straight to the quick setup section and select
03:41This is the top access point Hi then next Hi here we don't know the IP yet, you check the IP that
03:53will be connected to this access point Hi here I will connect the internet from the router
04:02jte Indihome jte Indihome namely f609 jte Okay, let's check the IP address of the modem router from Indihome jtef609
04:12If you already have internet, to find out your IP, you can download the wifiman application on the Playstore.
04:20Hi then go to this section discover and see the gateway this is the gateway this is the gateway
04:32From the router, from the modem router, you can press it directly or return to the previous one.
04:41Hi back to access point Hi to this change back zero divide to one then dot three three this is
04:51The device number of Hai CP210 itself is up to you, the last number is up to you, the main thing is that it has to be one second
05:00This is the name of your WiFi settings. I will name this computer ik and the password itself and select it.
05:09WPA2 is safe and not easily hacked by hackers, then you can also set the distance
05:15Change it to make the signal longer, namely number 27 or give it a value of 27 so that it can detect 27 km.
05:27from the signal from this CP OK it worked then finish the settings are complete now we will try to
05:36Hi, change the IP address on this laptop yourself, we will return it again. Hi, the IP address is back to you.
05:45To the Network adapter, right-click on the properties section and change the IP to one zero.
05:52finished earlier Hi and the default gateway change the IP number from the CP device, namely three Okay, it's finished
06:04We test Hi success Hi here you enter the password and username that you just created
06:16success Hi successfully entered the CP 210 mod with IP 1.3 behind it Hi G we tested the wifi which
06:27earlier it was the computer
06:33Hi hi hi hi hi hi Hi Okay, I have entered the password, then we will try to connect or join.
06:40Hi, we can't connect here because the Hi access point CP 210 is not connected to the internet.
06:50How to get it or can you connect to the internet, you have to unplug it first. Hi, other than the laptop
06:59and here also in the PPO you remove other parts Hi this is another part you remove Okay after that
07:10You and plug the cable from the JTE modem router from Indihome, this is the cable you and plug it in
07:20up to you Hi up to you Hi up to you Hi up to you in which part of the port line Hi up to you have entered
07:25Hi, if you have entered like this, you connect it to another part of the POI to this cable, this cable
07:34The new one is different from the other cable that I removed. This is another cable. Hi, this is the cable from
07:43ZTE f609 is a modem router that has internet. Okay, it's connected, now let's try to test it.
07:52Hi to this Wifi of computer X we connect Hi and it turns out we successfully connected successfully now we
08:03Let's test the internet connection. We can open Chrome. Let's test the internet connection. Can we do it?
08:14Hi, it turns out I managed to connect to the internet from JTE using the cp210 access point.
08:29channel Hi to now Hi we also connect the laptop computer X can also connect the Wifi
08:38Hi, now we are trying to log in to the JTE modem router login from Indihome, namely the gateway.
08:45point one point one like this Hi, I managed to connect to the JTE modem and the cpcp access point.
08:55Also
08:55can also connect to the next tutorial we will try to press the repeater bridge client
09:01gel and fire router for the next tutorial, just check the link in the description, that's all for the tutorial
09:09In this tutorial, don't forget to subscribe and thank you.
Komentar