- 15 hours ago
RBA redbrand20 Cigarette
go smoke free thats not my choice its yours
animation 01
animation 02
RGB Model Mesh
RGB Model Mesh UV yes
thanks for looking
ad
Cigarette RBA redbrand20
https://skfb.ly/pIQ7K
or
ad
Cigarette RBA redbrand20
https://link-target.net/575440/byLEcDo2WCjJ
go smoke free thats not my choice its yours
animation 01
animation 02
RGB Model Mesh
RGB Model Mesh UV yes
thanks for looking
ad
Cigarette RBA redbrand20
https://skfb.ly/pIQ7K
or
ad
Cigarette RBA redbrand20
https://link-target.net/575440/byLEcDo2WCjJ
Category
🦄
CreativityTranscript
00:00Hello, welcome to Blender and welcome to the Red Bang Alley Smoke Free. What a joker.
00:07Yeah, these are assets for the Light Club, just in case you're interested.
00:13In case anyone gets the wrong end of the stick, I'm making a cigarette.
00:19You say, what? You can't show a cigarette. What do you mean I can't show a cigarette?
00:24I've been around for years, so this is what I'm going to do. If you're not interested in the content,
00:30absolutely great.
00:32Just don't watch it, that's what I'll say to you.
00:35Here, I'm going to import my glyphoil, and it's here. It's called RBA, Red Tip.
00:42That's what it's called. If I go into wireframe, you can see the length of it.
00:47See how small it is on the floor. Pretty small, right?
00:51So, this is what we need to do. We need to take the Blender Cube.
00:55I'm going to scale it.
00:58I'm going to bring it down to the bottom.
01:01I'm going to zoom in. I'm going to look at it. I'm going to scale it even more.
01:07So, as you can see, I'm customizing the content exactly as you can see on the screen.
01:12So, as I said, I don't want anyone to get the wrong idea, because, yeah, they have it.
01:20Some models, when you make them, they might look like someone else's.
01:24As I said, I don't want to give people the wrong imprint.
01:27I'm going to scale it a bit smaller, and I'm going to put it about there.
01:32And I'm going to snap it down.
01:35And what I'm going to do, I'm going to take this, and I'm going to rotate it.
01:40I'm going to tilt it like this. I'm going to go here.
01:43I'm going to turn this to 90 degrees.
01:46Say yes.
01:47I'm going to take the asset, and I'm going to stick it inside the box.
01:54Really? Yep.
01:56Now, of course, as I said, it's in tile to you, but I'm going to put it about there.
02:01So you don't stick out the end of the box.
02:05Actually, I'm going to go one higher than that.
02:08I'm going to move it about there.
02:10Because when I put it to box, inside the box, it's not going to look too great.
02:17Okay, what I want to do is go to top view.
02:21Now, of course, again, in my personal preference, I'm going to leave it to scale as it is.
02:26I'm going to copy and paste it.
02:30And I'm going to move it over.
02:31And I'm going to put a little gap, maybe, between those.
02:36I don't want a gap between it.
02:38I mean, don't zoom that away.
02:44I want a little gap in it, but I don't want a big, massive gap.
02:47I want a tiny gap.
02:51Something a bit large.
02:55Something a bit like that.
02:56I've said, okay, I want to take both of these.
03:00And I want to paste them.
03:03Of course, you're watching the content in the making.
03:05So, as I said, I'm not here to offend anybody.
03:08And I'm not trying to be funny about the actual brands.
03:13Okay.
03:14So, I think it's great.
03:17How many do you want to put in here?
03:19Well, it's entirely up to you.
03:23Okay.
03:24So, I'm just kind of measuring out my actual content.
03:28Let's see how many I want to actually in the packet.
03:38I want to make it look like it's half decent.
03:42So, 3, and 6, and just do 7.
03:51Not for any particular reason.
03:53I'll just kill the 7.
03:58Something like that.
04:00And now we want to make a new file.
04:02I want to put all of those in there.
04:05I want to look here.
04:06I want to say apply.
04:07All transforms.
04:08I want to copy that.
04:10I want to copy those ones.
04:11I want to stick them back inside there.
04:14I want to select those.
04:19I need to find the centre origin of this thing.
04:22So, maybe that.
04:23Yeah.
04:24Double that.
04:25And this.
04:27Right there.
04:35Yeah.
04:37I've got about 40.
04:40I need to paste it again.
04:52Take these ones.
04:55Down a little bit.
05:00Just kind of keep it almost pretty similar.
05:03Just so.
05:07Okay, that's how it looks.
05:09If I go into standard mode.
05:10It looks like this.
05:13I think.
05:14Yeah.
05:14Yeah.
05:14Pretty kind of great.
05:15Not really kind of great.
05:17Because some of them will say.
05:18Oooh.
05:20You can't really do that.
05:21I mean actually I can.
05:23I think anyway.
05:24There's no harm in the making of the content.
05:27There's really not.
05:29As I said.
05:31If you don't want to watch the making of it.
05:32You don't have to watch it.
05:34Like I told you.
05:35As I said.
05:35It's good to watch the assets being made.
05:39So.
05:40What I'm going to do.
05:41Is click on the box.
05:42I want to edit the box of the comic.
05:45So.
05:45I'm going to push the box in.
05:47To about there.
05:52Then I'm going to zoom in.
05:54And.
05:55Then I'm going to snap it back on itself.
05:57About there.
05:59In fact.
05:59If I'm going to do that.
06:00I'm going to snap.
06:02And I'm going to snap it back on itself.
06:05And I'm going to snap it back on itself.
06:05And now I'm going to go over here.
06:07And I can push these in.
06:10I can zoom in.
06:12I can snap this one here.
06:14I can go here.
06:16And snap it forward.
06:18If you want to turn it back to the side.
06:20If you want to take it to the side of it.
06:23As I said.
06:24My content is not here.
06:25I don't seem to offend anybody.
06:27It's just to show you the assets.
06:30That I'm actually making.
06:31If you're interested in NFC assets.
06:34All the assets.
06:34I'm going to take it to the first charge.
06:37You can click on.
06:38Download and customize.
06:40Twist bend and shape them.
06:42However you like.
06:44Stop this out a little bit.
06:50Not too bad.
06:52We don't really want the top of this.
06:54Top of here.
06:56We don't want that.
06:58Like that.
06:59Because it doesn't look too great.
07:01Topping it.
07:02Hmm.
07:03Okay.
07:03Let's turn into wireframe.
07:06And drag this all the way down.
07:09To the bottom.
07:11So.
07:11Zoom in a little bit.
07:13Now.
07:14I make this.
07:15I'm making this.
07:16I apologize.
07:17I'm making this the same as my earbuds.
07:21Yeah.
07:22If you see the earbuds on my channel.
07:24Yeah.
07:26Then of course.
07:27Yeah.
07:28You know what they are.
07:29Of course.
07:30It's got no colour on it yet.
07:31There you go.
07:32How about that.
07:35Should we get that pass?
07:36No.
07:37Not quite.
07:38You need to put the paper inside it.
07:40And the top on it.
07:41And all that.
07:42Well mate.
07:43This is not one of them boxes.
07:44This is just a box.
07:46To hold it in.
07:47What they get all dirty.
07:49Yeah.
07:50The body would actually get dirty.
07:52Of course.
07:52We can put a top on it.
07:53And we can open and close it.
07:54If we want to.
07:55And we can add that later.
07:57If we really truly want to do that.
08:01So I'm thinking.
08:02Okay.
08:03And.
08:04What about the box?
08:07Yeah.
08:08Let's just customize this box a little bit.
08:12I don't want that.
08:13I want this.
08:14I want to basically bring this in.
08:16Just a little bit.
08:19And I'll do the back of it.
08:25But if I can turn it into one frame.
08:27I'll be able to see the way through that.
08:28I'll be able to find it.
08:29I'll be able to find it.
08:30Absolutely perfect.
08:33I'll say.
08:33I'll hide that.
08:34Hide that.
08:35I'll hide that.
08:37I'll go to here.
08:39I'll say.
08:40If you look at the actual pattern.
08:42I'll say.
08:42It's not far off it.
08:43It's almost there.
08:46So.
08:46It's pretty great.
08:48And we should do the sides here.
08:50Yeah.
08:50Let's do the sides as well.
08:52Let's just turn it around.
08:54We'll go into one frame.
08:56So.
08:56Let's just turn it around.
08:56We'll go into one frame.
08:57We're going to basically just.
08:59Put it down a little bit.
09:02Like the standard.
09:03Go back around and look at it.
09:05Thinking.
09:05Yep.
09:05A bit like a window frame.
09:07A bit like that.
09:07That's what we're doing.
09:09So.
09:12Just kind of scale it.
09:14So it kind of matches the other side.
09:19Okay.
09:20Now.
09:20What I'm going to do here.
09:22I'm going to select my faces.
09:26And of course.
09:28Ideally.
09:28I would put the name.
09:30RBA.
09:31RBA on that.
09:32Just so you understand that.
09:34That's exactly what it is.
09:36And do I want to do the inside?
09:38Not really.
09:39No.
09:40Only the outside.
09:41Go here.
09:43And I'm going to select.
09:46Those.
09:47And I'm going to split it.
09:53So.
09:53What I'm going to do is pull this over a fraction.
09:56I'm going to go into.
09:59Thinking about it.
10:00Let's go to light mode.
10:05Of course.
10:06As I said.
10:06The dish is going to be a standard box.
10:09It's just going to be something simple.
10:10So.
10:11We don't take too long on the video.
10:13That's it.
10:13I'll make a second box for it later.
10:15If you're interested.
10:16Now.
10:17I'm going to leave that weight.
10:22So.
10:23We're going to go here.
10:24We're going to get rid of that texture.
10:27And we're going to get rid of that.
10:28We're going to add a brand new texture.
10:30We're going to make it white.
10:31I'm going to make it off-weighed slightly.
10:34And.
10:35We're going to click on the actual box itself.
10:38We're going to get rid of that texture.
10:40Make a new one.
10:41And we'll make this.
10:46There you go. Look at that. Absolutely perfect for Red Band Annie isn't it?
10:54That's it, not the best box in the world. Of course it always changes to a different colour if you
10:58want to.
10:59That's it, it's our personal preference. But of course that's not my intentions.
11:04My intentions is just to basically make a very super box.
11:09So I'll stick my content in here. Great!
11:13Now of course what I want to do is copy and paste this.
11:20And let's go here. Let's paste it.
11:24And then I'm going to half tilt it.
11:27I want to stick it back on the floor. I want to do this 90.
11:36And then I want to go to the top view.
11:38I want to rotate it like this.
11:42And I want to move it like this.
11:47So you can actually see the actual thing itself.
11:50And then of course we're going to stick a blender plane in there.
11:57And we're going to scale down the plane.
12:05Just because we want something to stick it on.
12:07And of course it's actually on the surface.
12:10So we're going to click on that.
12:12I want to snap it back up to the surface.
12:15Kick off this.
12:16And then back down to the surface.
12:20Great! So this is the box.
12:23This is the colour.
12:25So let me avoid this one.
12:27Okay, so this is the colour.
12:29I want to press this and this.
12:31I want to go here.
12:32I want to join them there.
12:35I want to stick these.
12:37And that.
12:38Okay, so what I want to do.
12:39I want to select the whole thing.
12:41I'll go here.
12:42Apply all the transforms.
12:44And now I'll take all of these.
12:51And I'll parent it into the cube.
12:55So they go inside there.
12:57I'll take these.
12:59And parent those into the cube.
13:04I want to need more separate.
13:06So you've got a little separate.
13:07Just in case you want to look separate.
13:09Go here.
13:11Go here.
13:14Parent the objects.
13:15See.
13:16Yep.
13:17And of course we want to get rid of the light.
13:19I don't need that.
13:20I don't need those.
13:24And this is the base plate.
13:26Just stick it on.
13:27So you keep it on when I was in clean.
13:31And yeah.
13:31And what colour is that?
13:34Well.
13:35We can have that colour.
13:36Whatever we want.
13:37I'm going to have a blender black.
13:42Just like that.
13:44So it looks.
13:45Yeah.
13:45A little bit different.
13:47As I said.
13:47It looks better I suppose.
13:48If you've had a top on it.
13:49Yeah.
13:49We can do a top on it.
13:51As I said.
13:52I don't want to get all too fancy with it.
13:54Okay.
13:56Because you never know.
13:57You might not even like it.
13:58Go here.
13:59Select all of it.
14:00As I said.
14:01It's all applied.
14:02Right.
14:02Go here.
14:03Apply all transforms.
14:06Go here.
14:06Export.
14:07Back here.
14:09Download.
14:10RBA tips.
14:13And we'll call this number 2.
14:17And we'll record it back to Emma Bcube.
14:24To Emma Bcube.
14:29Just so you know who actually made the content.
14:31Just in case anyone out there says.
14:33Hang on.
14:34That belongs to me.
14:35No.
14:36Don't belong to nobody.
14:38As I said.
14:38All my content is absolutely free.
14:40Go back into an download.
14:40Save the receipts here.
14:45Ignore the error.
14:45That's just the windows messing around.
14:47And this is the message for the Windows 3D viewer.
14:49I'm just going to get rid of it very shortly.
14:52So I need to find a new way to look at my assets.
14:55I think it's great.
14:57As I said.
14:58What do you think?
14:59Do you think I pass for it?
15:01Yeah.
15:02Good enough.
15:02Imagine how it's in the game world.
15:03And you knock it over.
15:04And you all fall out on the floor.
15:06I think he did pretty great.
15:08As I said.
15:08He's got great potential.
15:10I hope you like the content.
15:11Don't forget to put a like and subscribe on there.
15:15I would appreciate you.
15:16So will you in the future.
15:17If we don't think so.
15:18See you next time.
15:20Bye.
Comments