00:00So problem is that I am going to plug in the charger.
00:05I am going to check the charging light.
00:10Power on the button.
00:12Turn on the screen.
00:23This is not the display of the screen, but the display of the screen is not the display of the
00:28screen.
00:28Some time, the light is flashing on the screen.
00:33Some time, the light is flashing on the screen.
00:384 times long beep and 2 times short.
00:411, 2, 3, 3, 4, 2 times long.
00:523 times short beep and 2 times short.
00:57This is the display of the screen.
00:59This is the display of the screen.
01:01Let's open it and check it out.
01:04This is the display of the screen.
01:25This is the display of ?
01:26There are a problem.
01:29When your charge reached it,
01:34I will use the distribution separately.
01:36The process is the output that I have been品.
01:43I
01:45don't
01:48I
01:49don't
01:51I
01:52don't
01:53I
02:09don't
02:11I
02:12don't
02:13don't
02:14I
02:14don't
02:14I
02:17don't
02:19I
02:19don't
02:23I
02:24don't
02:25I
02:25don't
02:26don't
02:27I
02:32don't
02:37I
02:49don't
02:51I
02:59don't
03:04I
03:05don't
03:13don't
03:15I
03:16don't
03:19I
03:20I
03:20I
03:20I
03:20I
03:20battery. Backover is open. This is a motherboard. The battery is open.
03:28The battery is open. The battery is open. The battery is open.
03:35So, this is a CMOS cell. The CMOS is open.
03:40That is a physical power. It is open. Woah, it is open.
03:44It is open. It is open.
03:51It is a 2 to 2 RAM, but I will use this to be a 1 to 2 RAM.
04:00I will use this to remove the RAM and remove the RAM.
04:13I will use the RAM and remove the RAM.
04:17so again we can set it up.
04:20Then we can set it up to input mode.
04:21So, which is simple,
04:26we can set the mode,
04:29but we can set up with this model.
04:31and then put my core 삼�ptitude to it.
04:37I will do that with this model.
04:41I will get installed now by Mr.
04:42I will do that now.
04:45So using this model,
04:46there's a real model,
04:47I want to go with this model.
04:47It's turning on.
04:49Now it's 2-3 times on-off.
04:51Okay.
04:53So,
04:54you don't have to do it.
04:56Before,
04:59let's do it.
05:00Let's do it.
05:01Let's do it.
05:02Let's do it.
05:03Let's do it.
05:07Let's do it.
05:10Let's do it.
05:19Let's do it.
05:20Displays shows.
05:21Click enter.
05:28It's again.
05:31Now it's done.
05:38Now it's done.
05:40The proper window,
05:42now it's done.
05:43to start. So, this is CMOS. This is the cell. It has 3 volt's full. This cell will
06:00and remove the cell. This way, we also remove the cell and remove the cell. This
06:13complete shutdown.
06:14This is the battery in the second.
06:19Then another cell is called cell.
06:22This is the primary cell.
06:25So first this is the battery I put on.
06:28Now, the second battery is now.
06:38Now, the battery is now connected.
06:40This is the battery connected.
06:42to be able to run
06:45if you have any
07:03I am going to charge the battery and the battery will be charged and it will be locked
07:08so now I am going to complete pack and check it out, I am going to charge the charger
07:16plug-in, charger plug-in, charging light on, power run, it will be locked, the display
07:25Pressure is on the right.
07:26Pressure is on the right.
07:28Pressure is on the left.
07:29Pressure will start.
07:30It will be available for now.
07:32Thank you very much.
07:32I will give you all your time.
07:33Peace be upon you.
07:35Peace be upon you.
Comments