00:00As is.
00:01As is.
00:02The transfer is complete.
00:06Lock that cable down now.
00:08We're starting the tow.
00:09It's secure.
00:10Pressure coming on the line.
00:15Almost there. Easy now.
00:35Is it true?
00:37I'm going to push this.
00:38I want to pull in a littleак.
00:46It has to be the stone M amargo.
00:48For the globet
00:48Beep. Beep.
01:45I don't know.
01:48...
01:54...
02:00...
02:01...
02:01...
02:06...
02:07...
02:10Let's go.
02:52Watch the starboard side.
02:54Clear.
02:55Bring it down.
02:58Engage the stabilizer lock.
03:00Let's go.
03:01Let's go.
03:03Let's go.
03:03Let's go.
03:05Let's go.
03:06Let's go.
03:14Let's go.
03:14Let's go.
03:14Let's go.
03:17Let's go.
03:18Let's go.
03:22Let's go.
03:25Let's go.
03:25Let's go.
03:48Let's go.
03:50Let's go.
04:00Let's go.
04:02Let's go.
04:02Let's go.
04:04Let's go.
04:14Let's go.
04:18Let's go.
04:25Let's go.
04:25Let's go.
04:26Let's go.
04:38Let's go.
04:49As you can see the starboard engine is heavily corroded.
04:52These cables here are completely disconnected.
04:54The propulsion system is dead.
05:10Look at the scoring on cylinder 3.
05:15Yeah, and the carbon buildup is excessive.
05:27All right, take the tension.
05:30Tension is set.
05:31Clear to lift.
06:03Clear to lift.
06:05Clear to lift.
06:17Clear to lift.
06:19Clear to lift.
06:21Clear to lift.
06:27Clear to lift.
06:28Clear to lift.
06:40Clear to lift.
06:48The vertical alignment is spot on.
06:51Horizontal is green across all sensors.
06:54We are aligned.
07:46Theностью Bianchi and thehoritans are captured.
07:50So
08:17The shaping process needs to follow the exact specifications on the blueprint.
08:21Make sure the filler application is uniform across this section.
08:25How's the contour looking on your end?
08:31Almost smooth enough for the primer.
08:45The glass and hybrid components are fully masked.
08:50Ready for the primer application on this section.
09:12One is the amount of mass vue.
09:13The value I send away is the top, the平和, and the color.
09:16The light is coming.
09:17Notice that the back of the contour is tall.
09:22The contour is the same.
09:24So they are able to fix the buttocks.
09:25The diameter is the same.
09:32The most important part is the matter.
09:59So, let's get started.
10:29So, let's get started.
10:53We are clear of the hangar structure.
10:57Proceeding to the launch zone.
11:09Scene 105, Axie Utama.
11:13The voyage stability test is carried out at medium cruising speed.
11:40Proceeding to the launch zone.
