Skip to playerSkip to main content
S1 E26 Part 1 – Sheller Plant Ki Production Boost Karne Ka Pehla Secret Hack! βš‘πŸ”§

Rice mill ki production slow ho rahi hai? Motor load zyada aa raha hai? Amper high chal raha hai?

Is episode S1 E26 Part 1 mein hum Sheller plant ka pehla powerful hack practically check karte hain jisse production smooth aur stable ho sakti hai.

βœ” Panel ki amper setting ka correct adjustment
βœ” Load balancing ka practical method
βœ” Motor performance check
βœ” Efficiency improvement tips

Yeh method specially rice mill aur industrial setups ke liye bohat valuable hai.

Har project ki tarah is setup mein bhi Ensa Solar Panels ki priority reliability aur long-term performance hoti hai taake system stable aur energy efficient rahe.

Agar aap chahte hain ke aapka mill bina rukawat ke chale aur production maximum mile to yeh video zaroor dekhein.

πŸ“² Official Links

YouTube: https://www.youtube.com/@ENSASOLARPANNELS

Instagram: https://www.instagram.com/ensasolarpannels/

Facebook: https://web.facebook.com/profile.php?id=100083182449738

TikTok: https://www.tiktok.com/@ensasolarpannels?is_from_webapp=1&sender_device=pc

Dailymotion: https://www.dailymotion.com/ensasolarpannels

πŸ”₯ Hashtags

#S1E26 #ShellerWorking #RiceMillProduction #ProductionBoost #FFRiceMill #IndustrialWork #MillMaintenance #ElectricalRepair #PowerFactor #MotorAdjustment #EnsaSolarPanels #SolarPakistan #EnergyEfficiency #IndustrialAutomation #PanelWiring #LoadManagement #ElectricianLife #RiceMillSetup
Transcript
00:00Hello everyone, welcome back to the Insasolar panel.
00:05We are now on FF Ridesmill.
00:09The problem is that we have to change the electronics.
00:16We have to take the electronics.
00:20We have to take the electronics.
00:20The electronics we have to show is that we have to show you.
00:25We are fixing the electronics.
00:29Now the electronics we have to change the electronics.
00:34We have the electronics that can change.
00:37We want to change the electronics and the electronics.
00:44Allah is God's word.
00:47This is the electronics we have only selected.
00:48and first the siren was on the top of the hubning
00:52so this is all right
00:54let's take a look at this
00:56and now let's go
Comments

Recommended