00:01The metal rack starts with coils of mild steel, chosen for strength and consistency.
00:13Rollers remove internal stresses and straighten the metal.
00:18The sheet is fed into a punching line, where slots, holes, and preliminary bends are added.
00:36Thickness is checked after rolling, punching, and cutting to ensure the metal still meets strength specifications.
00:59A series of shaping rollers accurately bends the vertical frame into its final profile.
01:29The coating process begins with electrostatically applying dry powder.
01:33The coated parts are cured in an oven at approximately 180 to 200 degrees Celsius, creating a durable, scratch-resistant
01:41finish.
01:58Laminate is applied to both sides of the particle board.
02:10Laminate is applied to both sides of the particle board.
02:13Pressure from a hydraulic press ensures the laminate adhesive cures properly.
02:30The laminated panels are cut to the required shelf sizes.
02:35The edges of the particle board are covered with melamine strips, then trimmed and finished to create smooth, durable edges.
02:51Remove the metal sticks from a rod and 달라 pour the material from inside to the plate.
02:52We'll be able to remove the pressure from the employee to clean and clean.
02:52Put the other side of the particle board are covered with the steel board.
02:58Whaneshirt is more than a plastic board.
Comments