00:30επιٹرات کو آپ کو اس کے باس دنگانہ کے پاس سکیں سکیں سکیں سکیں سکیں دنگانہ کے پاس نصفے ہیٹانے کے پاس سکیں دنگانہ کے پاس ہیٹانے کے پاس پاس نصفے دکھائیں
00:56This is L3 and H5, there are two errors in this case, this is L3 and H5, this is H3 and L5, this is PCB, there are two errors in this case, H3 and L5, so L5, H5 and L3,
01:22H5, this is the main IPM, this is the main IPM, and L3 is the IPM, two errors in this case, these are the IPM, so as you know, this is the IPM, this is the same, so this is the 15 voltage,
01:41this is the 15 voltage, here is the 15 voltage, this is the week, so this is the 2 errors in this case, so if it's the 15 voltage,
01:52this is the 15 voltage, this is the main IPM, this is the sensor, this is the sensor, so this is the screwdriver,
02:06this is the configuration, you know, its' the most important part, there are two errors in this case,
02:13this is the owner of two errors in this case, which we have seen here,
02:20because this error is due to this error.
02:26When it comes to 15 voltage,
02:30if one error would be missed,
02:34we can see which one error would be missing.
02:36When this error would be missing,
02:42these error would be missing.
02:46When this error would be missing,
02:50is
03:18All the screws come out ganakan is clean and add more alons per hour
03:27this leaves it
03:32this is 1,00,00 Loss
03:39300,000 Loss
03:41these you did it
03:46paste
03:48hard ہوئی تو اس میں اب یہ دیکھ لیں اب کہ اس میں اب 15 voltage
03:54کا جو capacitor ہے اسے ہم دیکھیں گے کہ 15 voltage کون سا capacitor
03:57یہاں پہ یہ 3 capacitor آپ کو نظر آ رہے ہوں گے ایک دو تین یہ
04:01سمپیہ سبلہ آئی ہے یہاں پہ ہم 15 voltage کا جو capacitor اسے
04:05traceیں گے پھر اسے کریں گے چینج پھر اس کو چلا کر دیکھیں گے کہ
04:08یہاں پہ error جو ہے اس کے وہ remove ہوا نہیں وہ omit دیں گے
04:11تو اب میں اس کو چلاتا ہوں اس کو چلانے کے لیے ہمیں یہاں
04:18پہ کیوں رکھیں نیچے خراب ہو جائیں تو یہاں پہ اس کو یہ دیکھیں
04:23یہاں پہ یہ n یہ والی n ہے یہ نظر آ رہی ہوگی آپ کو n یہاں
04:29پہ n اور یہ ہے l تو یہاں پہ n کی جگہ ہم n لگا دیں گے اور
04:35l والی پہ لگا دیں گے l کیونکہ یہ fuel سے ہو کے جاتی ہے تو یہ
04:39دیکھیں یہ capacitor لگے ہوئے ہیں یہ والے تو یہاں پہ اب 15
04:43voltage کا کونس ہے وہ ہم لونڈیں گے یہاں سے دیکھیں گے اور آپ
04:46کو بتاتا ہوں بیسے تو ہمیں پتا ہوتا ہے سارا مکمل لیکن آپ
04:50کو سکھانے کے لیے کیوں کہاں کے کام کرتے ہیں ہم تو اس لیے
04:53کوشش ہوتی ہے میری کہ آپ ہمیں جو بھی ہے کام کرتے ہوئے
04:57مکمل طور پر دیکھیں تاکہ آپ کو جو کام ہے وہ پتا چلے کہ
05:01کس طریقے سے کام کیا جاتا ہے اب ہمارا یہ reactor جو ہے یہ
05:05لگے گا یہاں پہ ایک وار یہاں پہ اور ایک یہاں پہ reactor کی یہ
05:09دیکھیں ایک ہم لگائیں گے یہاں پہ کیونکہ اس کے اندر reactor
05:13نہیں آتا یہ reactor لگ گیا اب یہاں پہ اس کو رکھ کے ہم دیں
05:22گے voltage voltage دینے کے بعد اس کو چیک کریں گے کیونکہ کئی
05:27طرح کے فارڈ جو ہوتے ہیں وہ جس سے جاتے ہیں اور ان کو تجربہ سے
05:33کام کرنا پڑتا ہے یہ ایسے نہیں ہوتا اس کو پکڑنا یہاں سے
05:39آپ نے ادھر آگئے یہاں سے پرس کر رہے پکڑنا یہاں سے
05:41ادھر ہو کر رہے یہاں سے پکڑ رہے یہاں سے
05:47تو یہاں سے اس کو یہ دیکھیں جی یہاں پہ آپ اس کے voltage میں
05:59آپ کو trace کے دکھاتا ہوں جی یہاں پہ دیکھیں یہ ground ہماری ہے اور یہاں
06:03پہ آئیں گے اس کے positive یہ دیکھیں جی تو یہاں پہ اس کے voltage
06:07ہمارے یہ دیکھتے چیک کریں یہ کتنے voltage دیتی ہے یہاں پہ
06:11اب سپرائی یہاں پہ
06:17اب یہاں پہ
06:26اب یہاں پہ یہ ہی مسئلہ ہے اس کے کہ یہ جو ہے یہ ہمیں یہاں پہ
06:40چیک کرتے ہیں جی اب یہاں پہ یہ دیکھیں جی یہ voltage جو ہے یہاں پہ یہ
06:48یہ 12 voltage ہی ہیں یہاں پہ تو یہاں پہ چیک کرتے ہیں اب ہم
06:58لیکن یہ سپلائی کے جو ہیں voltage جو دیکھیں یہ stable ہی نہیں رہ رہا ہے
07:08یہ voltage جو ہے سپلائی کے یہ voltage یہ ہوا ہوا یہاں سے یہ سارے dry
07:13ہوئے ہیں یہ دیکھنے در آ رہے ہیں یہی مسئلہ اس میں تو ضروری نہیں ہوتا
07:17capacitor یہی problem یہی ہے اس کو اب ہم اس کو کریں گے solding
07:20تو یہ نکالتے ہیں اب ڈسچارج کریں گے دکھائیں جی تو
07:23solderیں لگائیں جی تو اب اس کو کریں گے ہم solder
07:27یہی problem ہی اس میں یہ آگئی ہے جو کہ اب اس کو ہم solder ہی کریں گے
07:32problem یہی اس میں مسئلہ مسائل سارے یہ اس کی وجہ سی ہے
07:36تو اس کو اب چیک solding کریں جی
07:38تو اب میں اسے solding کرتا ہوں یہ دیکھیں آپ
07:45یہ dry sold جب ہو جاتا ہے یہ problem اس وقت اس میں آئی جاتا ہے جی
07:51دیکھیں اب آپ کے سامنے میں نے چیک بھی اسی لیے کیا تاکہ آپ کو پتہ
07:56چل جائے اب دیکھتے ہیں چیک کرتے ہیں حمید ہے کہ یہ repair ہو جائے گی
08:01اسی لیے اس میں دونوں error آ رہے ہیں
08:06تو اس condition میں کبھی کبھی six کا بھی error دے جاتی ہے یہ
08:11کیونکہ زیادہ load جو ہوتا ہے وہ پندرہ voltage پہ ہوتا ہے اس لیے نا
08:20بارہ voltage ہوں رلے لگی جاتی ہے نو voltage ہوں بارہ ہوں وہ رلے کام کر ہی جاتی ہے
08:27جیسے بھی وہ کام کر جاتی ہے جیسے بھی وہ کام کر جاتی ہے لیکن جب یہ
08:33پندرہ voltage دونوں ipmo پہ load اکٹھا ہوتا ہے تب یہ ایسے جب ہو جائے تو پھر یہ
08:39کام نہیں کرتے
08:42تو اب میں اس کو پکڑیں گے
08:48دیکھتا ہوں امید ہے کہ یہاں پہ voltage جو ہیں یہ اس کے stable ہو گئے ہوں گے
08:53کیونکہ یہ مسئلے جو ہیں نا یہ تھوڑے تھوڑے problem میں یہ آتی رہتی ہے اس میں چیزوں میں
08:58تو یہ دیکھ رہے ہیں اب یہاں پہ
09:01بے رکھ کاربن ابھی اس میں پراہ بھی سوڑا سا مسئلہ مسائل ہمارا کاری دیتا ہے
09:11دیکھیں اب بھی voltage اس کے جو ہیں
09:15دیکھیں اب بھی voltage اس کے جو ہیں یہ پندرہ کی بجائی یہاں پہ دیکھیں کام voltage ہے
09:31تو یہاں پہ پندرہ voltage اس کے نہیں بن رہے اسی لیے یہ مسئلہ ہے
09:35تو یہ پندرہ voltage اس وقت بنیں گے جب ہم اس کا capacitor change کریں گے اب ہم capacitor change اس کا کرنا ہی پڑے گا ہمیں
09:41ورنہ اس کے دو جو error آ رہے ہیں وہ نہیں جائیں گے جی
09:46لائے جی پیسٹر دیں مجھے
09:52ڈا
09:54ڈا
09:56ڈا
09:58ڈا
10:01ڈا
10:04ڈا
10:06ڈا
10:08ڈا
10:10ڈا
10:11ڈا
10:12ڈا
10:13ڈا
10:14ڈا
10:15ڈا
10:16ڈا
10:17ڈا
10:19ڈا
10:20ڈا
10:21ڈا
10:22ڈا
10:23ڈا
10:24ڈا
10:25ڈا
10:26ڈا
10:27ڈا
10:28ڈا
10:29ڈا
10:30ڈا
10:31ڈا
10:32ڈا
10:33ڈا
10:34ڈا
10:35Master?
10:36I'll go to the next one.
10:38I'll go to the next one.
10:58The landing is still here.
11:01I'm going to put it in the back.
11:08No glass.
11:11For the...
11:18Here we go.
11:30Here we go.
11:32This is negative and positive.
11:34This is negative side.
11:36We go here and positive.
11:38We go here and put it on the side.
11:40Then we go here.
11:42We go here.
11:48We go here.
11:50We go here.
11:52We go here.
11:58We go here.
12:15Let's go see.
12:16I'm going to show you.
12:46So we have been doing voltage here because here we do see that this voltage is
12:58stable or not.
12:5915 volts is stable here.
13:03here we have 15 volts.
13:05This we have been doing is just the same.
13:0715 volts is all over here but just the extra voltage.
13:10This is just the capacitor of the week.
13:12We have been changing.
13:14So we need to make a full fine fitted.
13:21Now I need to make a full fine fitted.
13:26So we need to cut the fine fitted.
13:33So now we are going to fit it again and we will see what we have seen in PCV
13:45do
13:49do
13:57do
14:01do
14:03do
14:05do
14:09Here you can see the key is the key.
14:19This key is the key.
14:31well lets do that one
15:00If you need training or work, this number is in front of you.
15:06This number is in front of you.
15:20This number is in front of you.
15:24This is my first number.
15:31This number is in front of you.
15:35I only do this number.
15:39There is a single unit of equipment.
15:44You will need it in front of you.
15:50have to do the same thing.
15:53This is the same thing.
16:06We have now put a piece of paper here.
16:09This is now put a piece of paper.
16:12We can put it in this piece.
16:14We have put it in the piece of paper.
16:19is a reactor of a reactor. So this motor is loaded so it will be done on this vehicle to
16:25the vehicle of its motorcycle. So this motor has a so-called motor. So this motor motor
16:31here is the motor is used, it will be used to set this vehicle to be installed and
16:37it will work your motor from the vehicle to the vehicle. So it can be used to move
16:40Now we have to see that the error is on, or the compressor is on.
16:47So error is the error.
16:51Now I will show you how to do this error.
16:57Now I will show you how to do this error.
17:03Now I will show you how to do this error.
17:09see you see you.
17:11This is your eye.
17:13This is your eye.
17:15A solar temperature.
17:17This is your eye.
17:19This is your eye.
17:21Now in this case,
17:23here we can see
17:25that the compressor
17:27is on or not.
17:29or a error
17:31will be the answer.
17:33The compressor
17:35is on.
17:37The compressor is not on.
17:39that's the one that is on the way.
17:41And you can see this.
17:43This is the blow motor.
17:45This is a lot of RTIM but you can see it.
17:48It's a bit of a condenser fan.
17:51If you can see it as a condenser fan,
17:53this blow motor will not be here.
17:55I will see it.
17:57This is a great one.
17:59So let's see,
18:01this compressor can be on.
18:03This compressor can be on.
18:05I can't wait for you to know what I'm going to do and I'm going to read this
18:10so it's kind of a big deal.
18:15you can see if you haven't read this a little bit.
18:21so I have a lot of errors in my opinion,
18:27if you want to watch video,
18:32But if you want to get a training, if you want to get a number, you can get a number.
Be the first to comment