00:00Here is how to clean your Apple Watch to get rid of dirt, lotion, and sunscreen.
00:05Which might affect it's performance.
00:07Before you start, you need a non-abrasive, lint-free cloth and you should turn off your Apple Watch.
00:14You might also need lightly running, warm, fresh water.
00:17To turn off your Apple Watch, press and hold the side button until the sliders appear.
00:23Then tap the OFF button in the upper right corner of the screen and drag the POWER OFF slider to the right.
00:30Now take off your Apple Watch and remove your watch band if it's leather or if you don't want to get it wet.
00:37Next, wipe your Apple Watch clean with the lint-free cloth.
00:41If necessary, you can dampen the cloth with fresh water.
00:45If your Apple Watch has visible substances or debris on it, you can hold it under lightly running warm fresh water until it's clean.
00:57Don't use soap or cleaning products.
00:59Be sure to clean any lotion, sunscreen or dirt from the back crystal.
01:04ECG and other readings might be impacted if the back crystal isn't clean.
01:09You should also turn and press the digital crown while cleaning to allow water to run over the small gap between the digital crown and the housing.
01:19For Apple Watch Series 10 and Apple Watch Series 11, you should also clean the speakers for optimal sound quality.
01:27These are on the side of your Apple Watch opposite the digital crown and side button, and you can clean them with a soft bristle brush.
01:37Hold your Apple Watch under lightly running warm fresh water and lightly brush the speakers in a circular motion with gentle pressure in order to clean the ports and meshes from every angle.
01:50Continue cleaning the speakers for at least 30 seconds and up to a minute to ensure you've removed any debris that might be obstructing the speakers.
01:59When you're done cleaning your Apple Watch, dry it with a non-abrasive lint-free cloth.
02:06Be sure to dry the surface of the back crystal.
02:09When drying the digital crown, be sure to remove water from its surface, the space between the digital crown and the watch case, and the surrounding surfaces.
02:19Once dry, you can put your band back on if you took it off, and put your Apple Watch back on.
02:26Then, turn on your Apple Watch. Just hold down the side button until the Apple logo appears.
02:36Next, you should clear any water from the speaker. To do this, press the side button to open Control Center and tap the Water Lock button.
02:46Then, press and hold the digital crown on the side of your Apple Watch until the display reads Unlocked.
02:56A series of tones plays to clear any water that remains in the speaker.
03:01If your audio was quiet or muffled before cleaning your Apple Watch, you can test it now to see if the audio quality has improved.
03:13Repeat the cleaning process if necessary.
03:16And that's how to clean your Apple Watch.
03:19And that's how to clean your Apple Watch.
03:23The quadruplecelapa computer idea of very Apple Watch is a device that you need laserGHT.
03:26I wells always can change this label or pencil with a very reusable light.
03:28The pirature will play yourself as it is叫 resort with three P opinionches using a chip-plasticanicide limit for the availability of their Almostических Famous Acts.
03:30When you forget to
03:32That's how to use your Apple Watch.
03:34Use a Apple Watch.
03:36Use again Power佐ете on Air Koloriasa with your Apple Watch.
Comentários