Skip to playerSkip to main content
🔥 FF Rice Mill | S1 E14 | Boiler Panel Wiring Final Inspection – Must Watch!

FF Rice Mill ke S1 E14 mein Boiler Panel ki final wiring inspection dikhayi gayi hai.
Is video mein industrial wiring aur rice mill projects ke liye final check aur setup explain kiya gaya hai.
Auxiliary wiring, spiral wiring, cable tie aur siren installation ka poora process cover kiya gaya hai.
Video ko end tak dekhein aur apna feedback zaroor dein.
Ye kaam Ensa Solar Panels ki taraf se hai, jo rice mill aur industrial panels ke liye trusted naam hai.

▶️ YouTube: https://www.youtube.com/@ENSASOLARPANNELS

📸 Instagram: https://www.instagram.com/ensasolarpannels/

📘 Facebook: https://web.facebook.com/profile.php?id=100083182449738

🎵 TikTok: https://www.tiktok.com/@ensasolarpannels?is_from_webapp=1&sender_device=pc

🎬 Dailymotion: https://www.dailymotion.com/ensasolarpannels

#FFRiceMill #S1E14 #BoilerPanel #FinalInspection #IndustrialWiring #RiceMillWiring #AuxiliaryWiring #SpiralWiring #CableTieWork #SirenInstallation #ElectricalWork #ElectricianLife #PanelSetup #ControlPanel #EnsaSolarPanels

Category

🤖
Tech
Transcript
00:00I hope you enjoy this video.
00:03This coil comes to the top.
00:09This coil was the first flap.
00:13The part will now be pushed.
00:15The point will be pushed.
00:19The body will enter the blue engine from its opposition.
00:24This is the set of three-hits tracking proporters.
00:28so this mechanism in the inside
00:33and as we will be off, here it will be off
00:37and the red wire, electricity will cut off
00:41which will be off
00:43and the magnet connector will be off
00:45and this delay time
00:48and this loading
00:50and this load will be set
00:52and this is off time
00:55and this is off time
00:57and this is off time
00:59and this is off time
Comments

Recommended