00:00This video is made by Canon IAR 3035 Machine.
00:07Here we will see the paper jama.
00:11First, the paper jama is made by the paper jama.
00:14First, the paper jama is made by the paper jama.
00:20The paper jama is made by the paper jama.
00:26The paper jama is made by the paper jama.
00:32Let's test the paper in the paper.
00:37The paper jama is made by the paper jama.
00:42Let's test the paper in the sensor.
00:47Now we'll see the paper jama.
00:48If you want to use a flim damage, we will replace the flim.
00:54If you want to skip this video, it will be easy to skip this video.
00:58If you want to subscribe to our channel, please do subscribe to our channel.
01:01Now, we will start the next service.
01:05Now, we will remove the jama paper.
01:08Now, we will remove the overstep.
01:10Then, we will do this plate.
01:14We will remove this tool.
01:17We will remove theерings.
01:28With the screw it will be removed.
01:31Next we will remove this.
01:34in green, we will be removed from the red audience.
01:39We will remove the corner.
01:42I will remove this, and I will remove this.
02:12Next, we remove the screw next bolt.
02:15If you remove the screw you will remove the screws.
02:29You can remove the screws from the left.
02:31Let's remove the screws.
02:33Nove of the screws we remove the screws.
02:37The screws are in place.
02:39Fusor Unit handle is very careful, this is very important.
02:46Ok, now the unit is very important.
02:51Now we remove the screw.
02:54This video continues, so the service is very important.
02:59This unit is very important.
03:01This unit is very important.
03:04This unit is very important.
03:11This unit will remove the screw.
03:27Okay, the plate is removed from the plate.
03:33It's like this.
03:36There is one step.
03:38There is a sensor inside.
03:40Now, the light rotate.
03:50Now, there is a sensor inside.
03:53Now, the sensor inside the black.
03:55There is a white line.
03:57With both this, we can repeat this.
03:59Then, we can delete all these current lines.
04:01Suppose, if we go over here, we can keep them apart from the black line.
04:06Then, the sensor inside the black line is correct.
04:11Now, let's do this.
04:12Let's release the two functions.
04:16Let's see.
04:18We need a bit of pressure.
04:20Let's remove this button.
04:22careful
04:47ha ha ha
04:48if we release it and not
04:51when we bring the extent where comes
04:52there's a black connector
04:53that way will remove it
04:56then, if we
04:59remove it
05:01we remove it
05:03and we remove it
05:04so select the
05:05heatு from the element
05:07the connector is removed
05:08is the same
05:09got 1945
05:10in this place
05:14this will be removed
05:16Remove the heat unit and remove the screw and remove the screw.
05:32This is the most important part of the fuse unit.
05:35The fuse unit is very easy and easy.
05:40But the first time we open the fuse unit,
05:43I am careful doing this.
05:44If you are using this video, you can use a lot of difference in this video.
05:47It is very easy to do this.
05:50I am using this unit.
05:55I am using this unit.
06:03Okay.
06:04I am using this unit.
06:07I am using this unit.
06:10I am using this unit.
06:15I am using this bag.
06:19I am using this unit.
06:24I have a little bit.
06:27I use this unit.
06:33I am using this unit.
06:38I will tell you about the bottom roller or the pressure roller.
06:41This is a free-ass.
06:43It is a free-ass.
06:44It is a free-ass.
06:46It is a free-ass.
06:48But it is not the same.
06:50It is not the same.
06:52So, we will use this bottom roller.
06:54We will continue to use this unit.
06:56Now, we will be using this unit.
06:58We will use the grease.
07:00This process is the same.
07:02We will see the service.
07:04We will see the ECR.
07:06And we will see the same things.
07:08We will see the same and the same things.
07:10The new parts are level,
07:12we will see the damage.
07:15So, carefully do that.
07:17We will do this video.
07:19We will do this video.
07:21You will do this.
07:23I will still have a special unit.
07:25I will use this video to help you.
07:27You will notice the same.
07:30I will do this video for the current.
07:32Sometimes, this is a very great chance.
07:34Let us remove the phlip, take a careful and remove the phlip, used to clean the phlip,
07:58Now I'm going to use the flim and I'm going to use this bathroom.
08:05I'm going to use the carflowers to use the bubbles and use the papers.
08:16We will remove the glass and remove the glass, but we will remove the glass, but we will not need it, and we will not grease it, so we will do it.
08:28Now, the grease is very good, so we will use the IP solution.
08:35We will spray the IP adjusters and wipe it away.
08:41We will spray the grease in the next step.
08:46Now, we will apply the IP solution, and we will clean it.
08:59Next, we will apply the grease.
09:02Next, we will apply the flim.
09:05The flim is very soft, and we will clean it.
09:14We will clean it.
09:15Now, there is no dust room.
09:17There is no grease.
09:19So, we will apply the grease.
09:22Next, we will apply the grease.
09:24This grease is different, if notstick.
09:29The grease is different.
09:30We will use the PT guidelines and then use the bike If not другой grease.
09:34But I never use the grease script.
09:37He will Language to control.
09:38This grease is different.
09:40This grease is different.
09:41We will use the grease 부 ح 낮.
09:43The grease will be applied, so it will be applied.
09:52Maximum, we will see the flim and the grease will be applied.
10:00We will use the grease.
10:03We will use the grease.
10:08If you want to upload a copy of our channel, you can subscribe to our channel.
10:20Now, if you want to do this, you will know how to do this.
10:24Why do we want to do this?
10:26We want to do this.
10:28We want to do this.
10:30We want to do this.
10:32We want to do this.
10:34We want to do this.
10:36We want to make a warning.
10:38The light line is the same as the light.
10:40We want to do this.
10:46Now, we want to load the light light.
10:48Now, this light line is also the light.
10:50Here's the light line.
10:52With the light line, we want to do this.
10:56We want to leave this position on the top.
10:58When you insert the flame, the flame will damage the flame.
11:28rotate and the right to rotate
11:32I am going to stop this edge
11:37I will make a nice
11:39I will make a nice
11:41and check this
11:44I am going to open the next
11:45I will close this and I will clean
11:47I will make a nice
11:49I will press it
11:51and I am going to use the tool
11:56This video will be a problem with the same tool.
12:00This video will be a doubt for you.
12:04As soon as you can see, you won't risk.
12:07If you need a service engineer, you can say that better.
12:11The heat is in the correct position.
12:26The heat is in the correct position.
12:30If the heat is in the wrong place, it will be a problem.
12:41Now we have a service here, but I don't see the confusion here.
12:53This is the black wire here.
12:57This is the lock.
13:00Now lock.
13:06The edge is in the position of the edge.
13:10The edge is in the position.
13:12The light will be able to get the edge.
13:19Next is the disconnect from the connectors.
13:23The disconnect from the connectors is not the reconnect.
13:27The other thing is the mistake.
13:31The white lines are the same.
13:34follow we have also made on the framework which is correctly
14:02Let's go to the next side of the bus.
14:32Get the of the front and the door.
14:34Now we need to insert the door.
14:36Let's go back to the door.
14:38Option here is the door door.
14:40The door is set.
14:44This door is locked.
14:46This door is locked.
14:48This door is locked.
14:50It's locked.
14:52This door is locked.
14:54It's locked.
15:02Let's connect with the loose connection.
15:32Next we insert the main connector
15:46We press the main connector
15:53But we need to be careful
15:56The unit is in the same way, and the unit is in the same way.
16:05The unit has to connect the unit.
16:10Now, the unit is in the same way.
