અમદાવાદના કોલેજ સ્ટુડન્ટે કૃત્રિમ રોબોટિક હેન્ડ બનાવ્યો, દૈનિક કામ કરવામાં સક્ષમ માર્કેટથી 5 ગણી સસ્તી કિંમત

વિદ્યાર્થીઓએ 4 મહિનાના સમયમાં માત્ર રૂ.8400ના ખર્ચે આ રોબોટિક હાથ તૈયાર કર્યો છે.

Transcript

00:00Our project design and engineering subject is what we are doing.

00:05We are going to observe and we are going to help in the technology.

00:17We are going to make a station every day.

00:22We are going to help in our project.

00:27We thought that we didn't help these people, and we made our help.

00:32And after that, we talked to our professor, A.M. Huck,

00:37that we did a good project.

00:39So, we supported that you were able to do this project.

00:43After that, we have our power electronics, Dr. I.N. Trivedi, Sir.

00:49We did a lot of support for this project.

00:54We did a lot of support for this project.

01:00And this project, I.N. Trivedi, is our principal.

01:05We did a lot of support for this project.

01:09We did a lot of design engineering project in 6M.

01:13We did a lot of work.

01:16We had our EMG sensor, which used to connect it into our hands.

01:20There was a lot of core movement of the EMG sensor.

01:23We had our MSCellen sensor sensor sensor.

01:26The signal made the RD through the servo motor.

01:29We decided to be able to amplify the RD through the servo motor.

01:35This is important in the serving of the servo motor.

01:38After this, we moved the thread through the air.

01:41We had our signal used to move the lever through the servo motor.

01:44We have a new one hand.

01:46If we have one hand, we can use this.

01:50But, if we have two hands, we have a future aspect of it.

01:54We have a sensor that we have to connect with brain.

02:00We have to get a prescription for that.

02:04I wish I could achieve it.