*Solar VFD Inverter Setting: A Comprehensive Guide*
Welcome to our video on Solar VFD Inverter Setting! In this comprehensive guide, we'll walk you through the process of configuring your solar VFD inverter for maximum efficiency and performance.
*What is a Solar VFD Inverter?*
A solar VFD (Variable Frequency Drive) inverter is a crucial component of a solar power system, responsible for converting DC power from the solar panels into AC power that can be used by your home or business.
*Why is Proper Setting Important?*
Proper setting of your solar VFD inverter is essential to ensure maximum energy production, efficiency, and safety. Incorrect settings can lead to reduced performance, increased energy losses, and even damage to the inverter or other system components.
*Step-by-Step Guide*
In this video, we'll cover the following topics:
1. *Understanding the Inverter Settings*: We'll explain the different settings and parameters that need to be configured, including voltage, frequency, and power output.
2. *Configuring the Inverter*: We'll walk you through the process of setting up your inverter, including selecting the correct settings and adjusting the parameters.
3. *Monitoring and Maintenance*: We'll discuss the importance of monitoring your inverter's performance and provide tips on how to troubleshoot common issues.
*Tips and Tricks*
We'll also share some valuable tips and tricks to help you optimize your solar VFD inverter's performance, including:
1. *Maximizing Energy Production*: We'll provide advice on how to maximize your energy production, including adjusting the inverter settings and optimizing the solar panel array.
2. *Troubleshooting Common Issues*: We'll cover common issues that may arise and provide step-by-step instructions on how to troubleshoot and resolve them.
*Conclusion*
By the end of this video, you'll have a comprehensive understanding of how to set up and configure your solar VFD inverter for maximum efficiency and performance. Whether you're a homeowner, business owner, or solar installer, this guide is designed to help you get the most out of your solar power system.
*Subscribe and Stay Updated*
Don't forget to subscribe to our channel for more informative videos on solar energy, renewable energy, and sustainable living. Thanks for watching!
Welcome to our video on Solar VFD Inverter Setting! In this comprehensive guide, we'll walk you through the process of configuring your solar VFD inverter for maximum efficiency and performance.
*What is a Solar VFD Inverter?*
A solar VFD (Variable Frequency Drive) inverter is a crucial component of a solar power system, responsible for converting DC power from the solar panels into AC power that can be used by your home or business.
*Why is Proper Setting Important?*
Proper setting of your solar VFD inverter is essential to ensure maximum energy production, efficiency, and safety. Incorrect settings can lead to reduced performance, increased energy losses, and even damage to the inverter or other system components.
*Step-by-Step Guide*
In this video, we'll cover the following topics:
1. *Understanding the Inverter Settings*: We'll explain the different settings and parameters that need to be configured, including voltage, frequency, and power output.
2. *Configuring the Inverter*: We'll walk you through the process of setting up your inverter, including selecting the correct settings and adjusting the parameters.
3. *Monitoring and Maintenance*: We'll discuss the importance of monitoring your inverter's performance and provide tips on how to troubleshoot common issues.
*Tips and Tricks*
We'll also share some valuable tips and tricks to help you optimize your solar VFD inverter's performance, including:
1. *Maximizing Energy Production*: We'll provide advice on how to maximize your energy production, including adjusting the inverter settings and optimizing the solar panel array.
2. *Troubleshooting Common Issues*: We'll cover common issues that may arise and provide step-by-step instructions on how to troubleshoot and resolve them.
*Conclusion*
By the end of this video, you'll have a comprehensive understanding of how to set up and configure your solar VFD inverter for maximum efficiency and performance. Whether you're a homeowner, business owner, or solar installer, this guide is designed to help you get the most out of your solar power system.
*Subscribe and Stay Updated*
Don't forget to subscribe to our channel for more informative videos on solar energy, renewable energy, and sustainable living. Thanks for watching!
Category
📚
LearningTranscript
00:00दोस्तों ने ये कमेंट किये थे कोई ऐसी वीडियो बना दें कि जिसमें सिर्फ हमें मक्सूस पैरामिटर सैटिंग के मतलख बताएं कि हमने अगर ये निया इन्वर्टर सोलर पैनल पा लगाना है अपने ट्यूबल के लिए या सब मर्सिबल पॉंप के लिए तो हमें सिर्फ
00:30कर यानि के प्रोग्राम तो आपने ये प्रोग्राम वाला बटन प्रES करना आफ जैसे ही प्रेस करेंगे आपके साथ मैनियोज आ जाएंगे इन मैनियोज
00:39मैनियोज को आप यह जो आप ऌन ड Indones हैनकी मजद से कोई भी मैनियोज जो है वो दूसरा स्लेक्ट करसे हैं
00:44So, what do you want to do in the P0 menu?
00:48Down arrow key to press the P0 menu.
00:52After that, enter button press the P0.00.
00:58Down arrow key to press the P0.17.
01:02Now, what do you want to do in the P0.17?
01:06When you press the P0 button press the P0 menu.
01:16After that, it will be possible to press the P0 menu.
01:20You will see the P0 menu.
01:26Now, when we press the P0 button, we will see the P0 menu.
01:31कि इसमें जितनी भी Fault History है इसके जो प्राने Fault है यानि के फ़र्द करें आपने ये किसी दूसरी जगा से उतारा भी है तो क्या होगा कि इसके Fault History जो है वो सारी किसारी किलियर हो जागी है देखें मैंने इंटर का बटन प्रेस किया इसकी Fault History किलियर होगी अब हमने करना है �
02:01कि इस इंवर्टर में जो भी पराना डेटा था वो सब का सब अब रेज हो गया है अब यह डिफार्ट वैलियो पे आ गया है इस तरह के जैसे आप के अभी हमने इसको न्यागरीद आया अब आपने इसको फैक्ट्री रिसेट कर लिया है अब उसके बाद आपने क्या करना ह
02:31feeding is P2 menu in order to use this arrow key to use P2 and enter button press
02:40first is P2.00 which is P2.00 which is the value check for enter button press here
02:49you can add 2 values feed 1 0 and 1 1 only 2 values feed 0 if you want to use this inverter
02:58you can add 3 phase or other motor if you want to use this to use the control control
03:04then you can add 0 because it will be G model if you want to use this value 1 and then
03:12enter button press here to save then this inverter is P model which is the same?
03:17if you want to use this heating or resistance load or elements or lighting or
03:23lighting then you can use this to use P model. if you want to use this to use P model
03:28We will convert G to P or P to G to the motor parameter again to feed.
03:33Because we have a solar panel on this side.
03:36We have a motor on this side.
03:38So, we have to enter a button on this side.
03:41After that, we have got P2.01.
03:46This parameter is the motor rated power.
03:49If you press enter a button on this side,
03:53you will save the power.
03:56When I nerd a cellphone,
03:59these power select the power.
04:02We complete it.
04:05We press the top distance.
04:11We press the
04:24what he rakhna hai to shift ka button press karee or isko zero karedee 4 kilowatt ho
04:30gaya inter ka button press karee uske baad haemara next parameter hai p2.02 inter ka
04:36button press karee motor key rated frequency hai to yeh aapne 50 hertz hi rakhni hai
04:41kyeo kya pakistan me 50 hertz chal raha hai uske baad joh next parameter enter ka
04:45button press karee next parameter aaga p2.03 inter ka button press karee motor key rated
04:52speed hai fardz karee aapki joh motor key name plate hai uspe rp am likkhe hoi
04:56hai 1450 aaga 3000 aaga 3000 aaga hai to aapne 3000 feet kar lene hai fardz karee
05:00meire paas 1450 wali motor hai to isko change karene ka tariqa gara phir wohi shift ka
05:05button meinne press kia yeh digit glow ho raha hai meinne kyunke 1450 karna hai joh
05:09value aapne change karene hai fardz karee aapne eek ko 2 karna hai to isko 2 kar
05:14sakate hai one waapas karna hai one kar dhe mein agar 1450 karna hai to yeh shift ka
05:18button or yeh 5 1450 haa gaya enter karun ga to yeh value save ho jayegi yeh motor
05:24ke rp am feed ho chukye hai uske baad aaga motor ke rated voltage aapne yeh bhi motor
05:29ki name plate se dhekhen hai ke motor ke rated voltage kitnye hai utne hahi feed
05:33karne hai fardz karee udher likha hua hai 400 to phir isko tupdil karne ka tariqa
05:37kar gya hai shift ka button press karee yeh glow ho raha hai down arrow key ki
05:41hai drei tayo visking karee utixe fiarelawister ki rata hai sake baad yeh most imported
05:48parameter p p2.05 yeh motor ka rated kartr ke yeh joh motor hai yeh wo kut nye acumpari
05:54karunyi kmuş xuni qranuri ya Acts year hia 4 kilowatt kay hesaab paras hai gho
05:58haram dunya iki kilovatt fi Maciche nya jiwawe chute kat let me
06:02youwala kurant hè yeh microbes whoutsu iti aa point th jumped
06:07install کرنے والا شخص آپ کو نہیں بتائے گا
06:09اس کا طریقہ کا یہ ہے کہ آپ
06:11اس parameter میں کوئی changing نہ کریں
06:13بلکہ باقی تمام parameter
06:15جو آپ نے change کرنے ہیں ان کو پہلے
06:17feed کر لیں اس کے بعد motor کو run کریں
06:19جب آپ کی motor
06:20100% یعنی کہ 50 frequency
06:23پر اور full load پر چل رہی ہو
06:25اس وقت آپ یہ shift کا button
06:27استعمال کرتے ہوئے یہاں پر جب
06:29ampere آئے تو وہ ampere note کر لیں
06:30پرد کریں یہی motor
06:32اس کا current اس وقت آ رہا ہے
06:348.8 ampere
06:35اگر آپ اس کو actually run کرتے ہیں
06:37تو وہ لے 5 ampere
06:38تو آپ نے کیا کرنا ہے پھر اس جگہ پر آ کر
06:415.5 ampere feed کر دینے ہیں
06:43اس کا فائدہ کیا ہوگا
06:44کہ جیسے ہی آپ کی motor کے بیرنگ خراب ہوں
06:47یا اس کے آگے جو mechanism آپ نے لگایا ہے
06:49چاہے وہ belt ہو, pulley ہو, gear ہو
06:51جس کی بھی وجہ سے آپ کی motor کا load
06:53بڑھنا شروع ہو
06:54تو کیا کرے گا یہ inverter
06:56پھر اس کو trip کروا دے گا
06:58اس کے اوپر OL1 یا OL2 کا error آ جائے گا
07:00لیکن یہ اسی صورت میں ہوگا
07:02اگر آپ نے ampere کی setting بالکل correct کی ہے
07:05اگر آپ نے ampere کی setting correct نہیں کی
07:07تو پھر کیا ہوگا
07:08motor پہلے 5.5 ampere لے رہی تھی
07:10motor پہلے لے رہی تھی
07:135.5 ampere
07:14اب جب تک وہ 8.8 ampere سے زیادہ load نہیں لے گی
07:18یہ inverter اس کو trip نہیں کروائے گا
07:20اور آپ کی جو motor ہے وہ پہلے بھی جل سکتی ہے
07:22تو یہ آپ نے
07:24اس کو بھی change کرنے کا طریقہ کار وہی ہے
07:26یہ shift کا button press کریں
07:27پرد کریں آپ نے کرنے ہیں
07:296.8 ampere
07:30تو میں down arrow keys
07:31پرس کرتا ہوں تو یہ آگیا 6.8
07:33تو انٹرمیٹ پرس کر دیں
07:35تو یہ ہوگے ہمارے motor کے parameter feed
07:37اس کے بعد
07:38اس کے بعد دوستو آجاتا ہے
07:42بی بی گروپ
07:42یہ ہے protection کا لوگ
07:44اس کی feeding بہت زیادہ اہم ہے
07:46آپ نے جب بھی motor
07:47کے ساتھ یہ inverter install کرنا ہے
07:50تو اس کے جو تمام بی بی گروپ کے parameter ہیں
07:52ان کو انتہائی
07:54درستگی کے ساتھ feed کرنا ہے
07:56اس کا طریقہ کار کیا ہے
07:57چلیے میں آپ کو اس کا طریقہ کار بھی بتاتا ہوں
07:59تو اس کے لئے آپ نے سب سے پہلے
08:02یہ escape کا بٹن پریس کرنا ہے
08:03آپ پیروکی کے مدد سے چلے جائیں
08:05پی بی گروپ میں
08:06تو یہ ہمارے سامنے آگیا
08:09پی بی یعنی کہ protection کا گروپ
08:10انٹر کا بٹن پریس کریں
08:12سب سے پہلے آگیا
08:13پی بی ڈوٹ
08:14یہ ہے انپوٹ فیز فیلیر کے لئے
08:18اس پہ بھی آپ دو ویلیوز فیڈ کر سکتے ہیں
08:21ایک زیرو اور ون
08:22زیرو فیڈ کر دیں گے
08:23تو اس کا مطلب یہ ہے
08:25کہ آپ نے یہ جو انپوٹ سپلائی
08:27اس کے ساتھ لگائی ہے
08:28فرض کریں
08:29میں تو اس وقت
08:30اس کو وابڈا پہ چلا رہا ہوں
08:32آپ نے یہ جو
08:32رس ٹی ٹرمینل پر جو وائز لگائی ہیں
08:35اگر ایک فیز
08:36مس ہو جائے
08:37تو یہ انوارٹر
08:38اس پہ
08:38انپوٹ فیز فیلیر کا فارٹ لے کے آئے
08:43یا نہ لے کے آئے
08:44یا آپ نے ڈی سی پہ بھی چلایا ہے
08:46تو آپ کے ڈی سی کا
08:47جو وولٹیج ہے
08:48وہ بہت زیادہ کم ہونے کی صورت میں
08:50اس انوارٹر پہ کوئی ایرر آئے
08:51یا نہ آئے
08:52تو اس کے لئے آپ نے
08:53سیٹنگ اس جگہ پر کرنی ہے
08:54اگر آپ زیرو کر دیں گے
08:55تو ایرر نہیں آئے گا
08:57یعنی کہ اگر آپ
08:57سولر پینل پر اس کو چلا رہے ہیں
08:59اور آپ کے پینلز پر
09:00دھوپ کی بجائے
09:02چھاؤ آ جاتی ہے
09:03یعنی کہ بادل وغیرہ آ جاتے ہیں
09:04آپ کے وولٹیج کم ہو جاتے ہیں
09:06تو یہ انوارٹر کیا ہوگا
09:07بار بار پھر ٹریپ ہوگا
09:08آپ کو ری سیٹ کرنا پڑے گا
09:10لیکن اگر آپ
09:11وابڈا پر چلا رہے ہیں
09:12تو آپ نے اس کو
09:13لازمی ایک رکھنا ہے
09:14تاکہ جب بھی آپ کا
09:16فیز فیلیر ہو
09:17تو یہ انوارٹر
09:17ایس پی او کا فارٹ دکھائے
09:19اور موٹر کو جلنے سے بچائے
09:21اور فنکشن کو روپ دیں
09:23تو آپ نے کوشش کریں
09:24سولر پینل پر بھی
09:25اس کو ون ہی رکھیں
09:26اس سے کیا ہوگا
09:26کہ آپ کی موٹر کی
09:27سیفٹی ہو جائے گی
09:28انٹر کا بٹن پریس کر دیں
09:30اب آپ نے
09:31انپوٹ فیز فیلیر کو
09:32ایکٹیو کر لیا ہے
09:33اس کے بعد آ جاتا ہے
09:34پی بی ڈاٹ
09:35زیرو ون
09:36یہ والا جو پیرامیٹر ہے
09:38آؤٹپوٹ فیز فیلیر کے لیے ہے
09:39اس کی بھی دو ویلیوز ہے
09:41زیرو زیرو فیڈ کرنے سے
09:42کیا ہوگا
09:43کہ یہ فنکشن پھر
09:44انویلیڈ ہو جائے گا
09:45آؤٹپوٹ کا فیز فیل بھی ہوگا
09:46تو یہ کوئی ایرر نہیں دکھائے گا
09:48اگر آپ ون فیڈ کر کے
09:50انٹر کا بٹن پریس کر دیں گے
09:51تو اس کا مطلب یہ ہے
09:52کہ جیسے ہی آؤٹپوٹ کا
09:54فیز فیلیر ہوگا
09:55یعنی کہ وہ سپلائی
09:56جو موٹر کو جا رہی ہے
09:57یہ جو ہم نے
09:59یو وی اور ڈبلیو
10:00یہ والی جو وائرز موٹر کے لیے
10:02ہم نے استعمال کی ہیں
10:03اگر ان کا کوئی بھی فیز
10:05یعنی کہ
10:05یو فیز
10:06زی فیز
10:06ڈبلیو فیز
10:07سے کوئی فیز
10:08آؤٹپوٹ فیلیر ہو جاتا ہے
10:10انویلیڈر سے نہیں آتا
10:11یا ہماری یہ
10:11وائر بریک ہو جاتی ہے
10:12جس کی وجہ سے
10:13موٹر تک سپلائی نہیں جاتی
10:14تو اس انویلیڈر پہ
10:16ایس پی ون
10:17ایس پی آئی
10:18یعنی کہ ایس پی ون
10:19کا فالٹ آ جائے گا
10:20اور آپ کو پتا چل جائے گا
10:21تو اس لیے آپ نے
10:22اس کو ہمیشہ
10:23ون رکھنا ہے
10:24ہاں اگر آپ نے
10:25اس کو زیرو رکھنا ہے
10:26تو اس کی صورت کیا ہے
10:27زیرو آپ نے
10:28اس صورت میں رکھنا ہے
10:29اگر آپ اس پہ
10:30سنگل فیز
10:31کوئی چیز چلا رہے ہیں
10:32سنگل فیز
10:33آؤٹپوٹ لے رہے ہیں
10:34یا آپ نے
10:35ٹو فیز کا کوئی
10:36کمپوننٹ
10:38اس کے ساتھ چلایا ہے
10:38تو پھر آپ کیا کریں گے
10:40کہ آپ اس کو
10:40زیرو رکھیں گے
10:41ادروائز آپ نے
10:42اس پروٹیکشن کو
10:43ایکٹیو ہی رکھنا ہے
10:43ون ہی رکھنا ہے
10:44انٹرکا بٹن پریس کر دیں
10:45اس کے بعد
10:48جو نیچٹ ہمارا پیرامیٹر ہے
10:50پی بی ڈوٹ زیرو ٹو
10:51انٹرکا بٹن پریس کریں
10:52اس کی ویلیو ٹو
10:54ہمارے پاس آئے گی
10:55جب ہم اس کو
10:56فیکٹری ری سیٹ کریں گے
10:57تو اس کو آپ نے
10:57ٹو ہی رکھنا ہے
10:58اگر سولر پہ
10:59آپ نے موٹر کو چلانا ہے
11:00اگر آپ نے
11:02اس انویٹر پہ
11:02موٹر کی فریقوینسی
11:04ٹھرٹی رکھنی ہے
11:05ٹونٹی یعنی کہ
11:06ٹیس یا بیس
11:07یا داس
11:07یعنی کہ
11:07کم فریقوینسی پہ
11:08موٹر کو چلانا ہے
11:09تو پھر آپ نے
11:10اس کی ویلیو کو
11:11زیرو کر دینا ہے
11:12یہ اثر میں
11:13اوورلوڈ
11:14یعنی کہ
11:15اس کے کولنگ افیکٹ کی
11:16اوورلوڈ پروٹیکشن
11:17ہے
11:18تو آپ نے
11:20اس کو ٹو رکھ کے ہی
11:21انٹر کرنا ہے
11:21اس کو ٹو ہی رہنے دینا ہے
11:23اس کے بعد آگیا
11:24پی بی ڈوٹ زیرو تھری
11:26انٹر کا بٹن
11:27پریس کریں
11:28اس کی ویلیو سو ہے
11:30اس کو آپ نے
11:31ہنڈرڈ ہی رہنے دینا ہے
11:32اس کے بعد آگیا
11:33ہمارا موسٹ امپورٹنٹ
11:34پیرامیٹر
11:35پی بی ڈوٹ زیرو فور
11:36کیونکہ ہم نے
11:37جب سولر پہ
11:38اس کو چلانا ہوتا ہے
11:39تو ڈی سی انپوٹ
11:40کے جو وولٹیج ہیں
11:41ان کو اچھے طریقے سے
11:42مینج کر لے کے لیے
11:43یہ والا پیرامیٹر
11:45سمجھنا آپ کے لیے
11:46بہت ضروری ہے
11:46اس کا میں
11:47یہ جو پی بی ڈوٹ
11:50زیرو فور پیرامیٹر ہے
11:51یہ انپوٹ
11:52ڈی سی وولٹیج کے لیے
11:53اس کا میں آپ کو
11:54ایک گرام بدا دیتا ہوں
11:55جتنا کریکٹ اور
11:56اچھے طریقے سے
11:57آپ یہ والا پیرامیٹر
11:58فیڈ کر دیں گے
11:59اتنی ہی اچھے ریزلٹ
12:00آپ کو اس انوٹر سے
12:01ملیں گے
12:02آپ کو پھر
12:02یو جو کا
12:03یا یو بی کا
12:04یعنی کہ انٹر وولٹیج
12:05وغیرہ کے جو
12:06فارٹ آپ کو
12:07دیکھنے کو ملتے ہیں
12:08وہ پھر ہر گر نہیں آئے گے
12:09تو چلیے
12:10میں آپ کو اس کا
12:11گرام بنا دیتا ہوں
12:12جس سے آپ کو
12:12آسانی سے سمجھ آ جائے
12:13کہ آپ نے
12:14اس کی ویلیوں کو
12:15کتنا رکھنا ہے
12:16پی بی
12:18ڈوٹ زیرو فور
12:21یہ والا جو
12:22پیرامیٹر ہے
12:23اس کی آپ جو
12:24سیٹنگ رینج ہے
12:25وہ ستر سے لے کر
12:26ایک سو داس
12:28تک فیڈ کر سکتے ہیں
12:29یہ والا جو
12:31آئی این ویٹی کا
12:32انوٹر ہے
12:32اس کی جو
12:33انپوٹ ڈی سی والڈیج کی
12:35رینج ہے
12:35چار سو سے لے کر
12:37آٹھ سو والٹ
12:39ڈی سی تک ہے
12:39اب آپ نے
12:41ستر سے ایک سو داس
12:42تک اس کی ویلیوں کو
12:43فیڈ کی طرح سے کرنا ہے
12:44اس بات کو سمجھے
12:45تو میں یہاں پر
12:46لکھ دیتا ہوں
12:47ستر
12:47اس کے بعد
12:49ہم لکھ دیتے ہیں
12:50اسی
12:50پھر نوے
12:52پھر سو
12:54اور اس کے بعد
12:56ایک سو داس
12:57اگر آپ کے پاس
13:00جو انپوٹ ڈی سی والڈیج ہیں
13:01وہ چار سو یا چار سو سے کم ہے
13:03تو پھر آپ نے
13:04اس کو ستر فیڈ کرنا ہے
13:06اگر آپ کے
13:07ویلیوں کو
13:07سو بڑے
13:08یعنی کہ پانچ سو ہو گئے ہیں
13:09تو آپ نے
13:10اسی فیڈ کرنا ہے
13:11انپوٹ کے
13:12ڈی سی والڈیج
13:13اگر چھ سو ہو گئے ہیں
13:14تو آپ نے
13:15نوے فیڈ کرنا ہے
13:16سات سو والڈیج پہ
13:17آپ فیڈنگ کریں گے
13:18سو
13:19اور آٹھ سو والڈیج
13:21یعنی کہ
13:21اس کے میکسیمم والڈیج
13:22تک آپ فیڈ کریں گے
13:23ایک سو داس
13:24اب فرض کریں
13:26کہ آپ کے پاس
13:26جو والڈیج ہیں
13:27چار سو اور پانچ سو
13:28کے درمیان ہے
13:29کہ سمجھ لیں
13:29کہ چار سو پچاس ہے
13:31تو آپ پھر کیا کریں گے
13:33کہ ستر اور اسی
13:34اس کا درمیان
13:35کیا نکلے گا
13:36سیونٹی فائیو
13:37تو آپ پھر
13:37سیونٹی فائیو
13:38فیڈ کر رہے ہیں
13:39فرض کریں
13:40کہ میرے پاس
13:41جو چار سو پچاس
13:42اور پانچ سو
13:43کے درمیان ہے
13:43470 voltage
13:45So what do you do
13:4775 and 80
13:48What do you do
13:50You can see
13:5177 or 78
13:52Then 78
13:5389
13:54So you can see
13:56You can see
13:58This graph
13:59You can see
14:00When you have
14:01PV.04
14:02Setsing
14:02Input
14:03DC voltage
14:04And
14:05This value
14:07You can see
14:07Input
14:08DC voltage
14:09Input
14:13DC
14:14Volt
14:15These are all
14:16These are all
14:17These are all
14:17These are all
14:18These are all
14:18These are all
14:19These are all
14:20Now let's go
14:20Inverter
14:21So this
14:23PV.04
14:24Inter
14:24I have to press
14:25You can see
14:26Feeding
14:26I have to do
14:27Input
14:28DC voltage
14:29Which you can see
14:29Input
14:30Change
14:3190
14:32So
14:33Shift
14:33I have to press
14:33Inter
14:36I have to press
14:36Save
14:37It has to be
14:38Input
14:38PV.05
14:41This
14:42When you have to
14:55Input
14:56Input
14:56Input
14:57Input
14:57You can see
14:57Input
14:58Input
15:02You can see
15:04Input
15:05Input
15:06Input
15:06This
15:07Over
15:07Voltage
15:07Input
15:09Input
15:09Input
15:09Input
15:10Input
15:11Q3, which goes back to the full fault.
15:16If you can get over voltage to the full fault in order of the INVAR scatter,
15:19but you can Reter save 0.
15:24Enter button press and enter the end of the turbo.
15:28This parameter will be very important.
15:31This parameter will decrease.
15:34The value should be 120 to about 110.
15:38So this way you can understand the graph that I have to understand.
15:45PB.07
15:49This value which you can feed is 110 and 150.
15:53This is the same formula that you have 110, 120, 130, 140 and 150.
16:04You know that this inverter's voltage is 400 and 800.
16:08If it is 400 or 400, it is 110.
16:11If it is 120, if it is 120,
16:14if it is 130,
16:16if it is 140,
16:19if it is 140,
16:21if it is 140,
16:23if it is 140,
16:25if it is 140,
16:27if it is 140,
16:29if it is 140,
16:30if it is 140,
16:32if it is 140,
16:33if it is 140,
16:35if it is 140,
16:36if it is 140,
16:37if it is 140 or about 150,
16:38which I have to understand.
16:40So here that you have parameter setting
16:42باتیں جو جب آپ inverter
16:44کو انسٹال کریں گے تو آپ
16:46کے لئے بہت ضروری ہے ان کا جاننا وہ باتیں
16:48کون سی ہیں کہ کئی مرتبہ ایسا ہوتا ہے کہ
16:50ہم نے solar panel کم لگائے ہوتے ہیں
16:52جس کی وجہ سے ہمارے input voltage
16:54کم ہوتے ہیں تو پھر کیا ہوتا ہے ہمیں
16:56P off کا ایک error
16:58P off کا ایک error دیکھنے کو ملتا ہے
17:00تو اس کے لئے آپ نے کیا کرنا
17:02یہ program کا button press کریں
17:04اور چلے جائیں PE group میں
17:06PEI enter کا button press کریں
17:08آپ اس کی value کو
17:10change نہیں کر سکیں گے اس کے لئے آپ
17:11password. So enter button press here. You can press password here. You can press password here.
17:15You can press 4 721. So password to go to the method. You can press shift button here.
17:21Here I will press 4. This is 40. Then this is 7. Then this is 2. Next 1.
17:314 721. Then enter button press here. Now this is P.E. menu open.
17:36this term is the way you can see from the other side.
17:40It has a different value in the left.
17:44The value of this value is a high value,
17:46which allows the value of this value to the left.
17:50The value of this value,
17:52the value of this value is the value.
17:54So you can see here,
17:57which value of this value is less than zero.
18:00So you can then add to that value.
18:03is to you P of error would have done, so if you have to save the inviter, then you can
18:12also send the inviter to the inviter on, then you can also send the inviter to the inviter
18:19and then you can send the inviter to the inviter.
18:23Then you can press the inviter.
18:28If you have an inverter for safety for the other thing
18:33OU3, which is over voltage for the fault,
18:36then you can press the P.E.07.
18:40This inverter is the maximum limit of voltage.
18:44So, what do you do?
18:46Some people have inverter for the same time.
18:49They can feed the voltage.
18:52If you have 500 voltage,
18:55then it will be 600 voltage feed.
18:58If you have an inverter for over voltage,
19:02then it will be 600.
19:05But if you have an inverter for the other thing,
19:07then you will have a solar panel.
19:09If you have a solar system,
19:11then you will have an inverter OU3.
19:15The voltage will be greater.
19:19So, when you have a solar panel,
19:21you will have a lot of power to get there.
19:25And the actual DC voltage will be different.
19:29And you will see it,
19:30then you will see it.
19:31You will see it.
19:32And when you have 300 volts,
19:34you will see it.
19:36You will see it.
19:38If you have 600 volts or 700 volts,
19:40then you will be able to get there.
19:42the input voltage will be added to inverter 1.00 per error and the component will not be
19:49fixed.
19:51So this setting will be done.
19:54So these two settings will be very important.
19:57Now let me explain the connection to this inverter.
20:03If you have to charge this solar supply,
20:06then you will have to charge this terminal.
20:09terminal and negative and you have to keep the terminal positive and negative and you have to
20:19not be able to do this. If you are going to run the AC supply, you will have to run the
20:26terminal and you will have to run the terminal. If you are not a good technician, you will
20:37in a new inverter installs, then you also need solar panels which are sold.
20:42and then you will have no idea.
20:44So what do you do?
20:45The terminal is called T-terminal.
20:48The terminal is called T-terminal.
20:49This is called T-terminal.
20:51The terminal is called solar panels which will be used to munitions so you can apply and apply,
20:54then you can apply to positive and negative,
20:58either positive and negative and so you will play with this.
21:03can be. So then you would have to do this point. But this one
21:09is that if you have, I have to do this energy system, but if you
21:14can all let it be, if you want to get solar to get it, you want to go
21:17to the center of the power. If you find that sharing system, then you
21:21don't have to go and share it. The power to go and push that
21:27in the power is here. Then you can see it here. And you get it,
21:32motor के साथ लग जाएगी
21:34अच्छा कुछ दोस्तों ने मुझे कहा था
21:36कि यार हमें motor की name plate से देखना
21:38नहीं आता कि जो motor की name plate
21:40है इस पे कितने kilowatt है या किस तरह
21:42हम चेक कर सकते हैं तो उसका भी थोड़ा
21:44समयाब को बता दो उसके बाद हम motor को run करते हैं
21:46तो ये दिखें लिखा हुआ 50 हर्ट ये है
21:49मोटर की frequency ये एक सीमन्स की अच्छी मोटर है
21:52जिसको आप दो frequency पर चला सकते हैं 50 हर्ट पर भी और 60 हर्ट पर भी
21:57लेकिन आपके पास जो ज़्यातर मोटर होंगी
21:59वो सिर्फ 50 हर्ट पर होंगी इस तरह एजड लिखा होगा
22:16है वन पाइंट एटम पेर हो जाएंगे ये इसकी स्पीड है
22:191695 मिनट लिखा हुआ है यानि के आर पिम ये इसकी स्पीड है
22:25उसके बाद इसी तरह इसकी स्पीड 1395 ये कॉस फाइज का पावर फैक्टर है
22:29यानि के 0.81 ये है नेम प्लेट को पढ़ने का तरीका इस तरह आप इससे ये डेटा कॉलेक्ट कर सकते हैं
22:35और आपने इनवर्टर में फीड कर सकते हैं चलिए अब हम इस मोटर को चलाते हैं
22:39और चन्द और जो मजीद जरूरी सेटिंग्स है वो भी मैं आपको बताता हूँ
22:43तो ये देखे आप इस मोटर को चलाने के लिए मैं क्या करूंगा ये इस इनवर्टर से ये रन की कमांड दूँगा
22:49जैसे ही मैं ये रन का बटन प्रेस करूंगा ये देखे मैंने रन का बटन प्रेस किया
22:53फ्रीक्वेंसी हमारी बढ़ना शुरू हो गई ये जाएगी 50 हर्स तक और उसके बाद ये मोटर की जानब देखें
22:59so this motor is better now
23:02motor frequency is complete
23:04if you want motor speed
23:06if you want motor speed
23:08then you have two buttons
23:10up and down arrow key
23:12so if you want to press down arrow key
23:15so you can see
23:16frequency here is
23:18this time
23:20this time
23:21frequency will be
23:23our motor speed will be
23:25so you can see
23:27if you want to press this button
23:31if you want to press this button
23:33then press this button
23:35then press this button
23:3710 hours
23:39motor speed will be slow
23:41so this time motor speed
23:43for you can use
23:45up and down arrow keys
23:47to use motor speed
23:49to use motor speed
23:51now when you have
23:53the motor speed
23:55motor
23:57because this is a small motor
23:59if you want to check this
24:01ampere
24:03which I have told you
24:05what to do
24:07shift button
24:09press this button
24:11you have the voltage
24:13input DC voltage
24:15and press this button
24:17and the power speed
24:19is also 592 volts
24:21then press this button
24:23and you can see
24:25AC voltage
24:27which is a power speed
24:29which is a power speed
24:31which is a power speed
24:34and 0.5
24:35now if you need
24:37you can go
24:39to use motor speed
24:40to use motor speed
24:41parameter in me I want you to add 0 se $7 be a feed feed
24:47me I am going to give you an example I will show you
24:50so here I will add the Ampere and that would be a good way
24:56inverter in your hapster is your handle
25:00I will switch to the frequency
25:04I will stop the motor.
25:07What will happen?
25:09The motor will be stopped.
25:11When you install the motor,
25:13then what happens when you install the motor?
25:15What happens when we turn the motor?
25:17The motor's direction is altered.
25:19If we turn the motor in the direction,
25:22then what happens when we turn the motor?
25:24We turn the motor into the output.
25:26This is the output of the motor.
25:29The motor is open.
25:31If we turn the motor into the transcendence,
25:35then our motor will change.
25:37The motor switch is open.
25:40We open the motor and can change.
25:43If we turn the motor has a turn,
25:45the motor will change.
25:47The motor will change.
25:49If we turn the motor in the direction,
25:52then we turn the motor to turn the motor in the direction.
25:55But if necessary,
25:56we will activate the motor does not go up.
26:00and then you go to the P7 group.
26:03Press the button to enter.
26:06Then you go to P7.03.
26:10You press the button to enter.
26:14You press the button to enter.
26:17You press the value to save.
26:20Now you click the button to enter.
26:24Escape the main menu.
26:27Now you press the button to enter.
26:31You press the button to enter.
26:33The LED will be on.
26:35The motor will be on.