How To Fit & Adjust Your Cycling Cleats

Cycling Weekly

Incorrectly fitted cleats can cause knee pain or even injury. We speak to a bike fitting expert on how to get yours sorted.

Transcript

00:00Hi, I'm Hannah Reynolds, fitness editor at Cycling Weekly. Today I'm at Bespoke Cycling's

00:11flagship store in Canary Wharf with expert bike fitter Ben Hallam, who's going to show

00:15us how to fit our cleats to our road shoes. Today we've got SPD-SL cleats with 105 pedals,

00:22but the principles are the same whatever cleat and pedal system you're using. We've loosely

00:26fitted them, so now over to Ben. Where do we start?

00:29What we need to do first is a standing and moving assessment to understand how the body

00:33moves off the bike so we know how to set up the cleats on the bike. Now you can do this

00:37in front of the mirror yourself and be able to see your body's natural movement patterns

00:41and where you may need to move your cleats. So first thing I'd like you to do is have

00:45a little march on the spot for me and then stand whatever feels nice and comfortable

00:48for you. That's good. So we're looking for are the feet rotating out, rotating in? Are

00:54we naturally standing very wide, in which case the feet when you're riding may need

00:59to be moved to the outside. Here we can see on the left hand side we have a slight rotation

01:04out. Next thing we want to do is look at a little bit more dynamically what happens as

01:10you move. Stand about shoulder width apart and I want you to rotate feet straight ahead

01:16for me. Now this may feel a little unnatural, but we want to see where your body moves out

01:23of that straight alignment because it gives us an indication of what we may need later

01:26on when we're fitting the cleats. Raise your arms up in front and sit back and down into

01:31a squat as low as you feel comfortable going. What we're looking for here are do the feet

01:36rotate out as we move? Do the knees bend out? Do the knees drop in? If the knees drop in

01:42we may need to allow some rotation in the cleat to not restrict this movement. So next

01:49Hannah what we need to do is a seated assessment to look at rotations around the knee. Take

01:55a seat on the end of a bed or a couch with your feet dangling in the air like this. What

02:00you're looking for if you look down from the top, does your foot sit straight? Does it

02:04rotate in? Or does it rotate out? This is going to indicate where we need to potentially

02:10set your cleats so that you're not forcing your foot to be in a position it does not

02:15want to be in. So Hannah, next we're going to deal with the cleat position fore and aft.

02:21Now this is very important because if the cleat is too far forward the pedal axle ends

02:27up underneath your toes. That will lead to you gripping with your toes which can often

02:31lead to cramping in the foot. It also is a less stable position to be able to push through.

02:37If you imagine climbing a step and only having your toes on the step then think about how

02:43much pressure you could put through your foot. Vice versa, if the cleat is too far

02:48back then we're losing out on a lot of leverage and efficiency can be affected. So to measure

02:53this what we're going to do is use a flat surface like a skirting board to be able to

02:58get a reference point of how far the balls of your feet are away from the back of your

03:03foot. So what I want you to do Hannah is stand with your heels against the back of the skirting

03:08board. I want the feet to be nice and straight. So if you straighten up your feet, good. And

03:13I want your ankles to be in a nice neutral position. So not dropping your arches all

03:17the way in. Next we're going to take a tape measure and we're going to measure the distance

03:21from the back of the skirting board up to the ball of the foot. So the knobbly bit on

03:27the inside of the foot at the base of the big toe. And here we're at 17 and a half centimetres.

03:35Now we want to transfer that measurement across to the shoe. Now the best way I've

03:39found of doing this is putting a little piece of electrical tape on the side of the shoe

03:44to allow you to place a mark on the shoe without actually damaging your shoe. What I prefer

03:49to do is to actually place the cleat slightly behind that first ball of the foot because

03:55underneath that first ball of the foot there are a couple of little caesamoid bones that

04:00are similar to a knee cap to allow the transmission of force around there. If we load those, some

04:06people find them a little bit sore. So I want to hit just behind that point. So what I tend

04:11to use is just the thickness of the back of the shoe to add that little bit of length

04:16to hit just behind there. Now if your shoes have a little bit of plastic on the back,

04:21like a city, we want to add that measurement to the measurement we've already taken. Next

04:26we want to place the shoe against the skirting board in a straight position. Take your tape

04:33measure along the inside of the shoe, take your pen and mark the measurement that you've

04:39made just up the inside of the shoe. So here we're at 17 and a half. Every cleat has a

04:46mark on the side showing where the axle sits underneath the cleat. This is what we want

04:52to line up against the mark we've just made. Next we want to deal with rotation. Here at

04:58Bespoke we use a fancy little tool from Ergon to allow us to replicate exactly the rotation

05:04of the cleat every single time. But you can do this very quickly with a piece of corrugated

05:09cardboard cut out to the same shape as a cleat. For Hannah, on the left hand side we need

05:16a slight rotation heel in and then tighten up the bolts. Next what we want to do is deal

05:23with the position in and out, so the lateral position and relationship of the foot, knee

05:29and hip. To do this I would ride on a turbo in front of a mirror so that you can see the

05:34position of your hip, knee and ankle. If knees and hips are tracking outside of your foot

05:42then the cleat probably needs to be pushed inside which will put your foot slightly further

05:47out, a little bit wider. Vice versa, if your knees and hips are inside of the position

05:54of your ankles then the opposite needs to happen. Push the cleat to the outside of the

05:59shoe which will put the foot closer in. Lastly we need to deal with rotation. Hopefully we've

06:05done the majority of this with the body assessment that we've already done. Now we need to

06:11feel if we are sitting on the edge of the float that is available. Often I find it easier

06:17to close your eyes and feel if your foot is being forced to sit in a position that isn't

06:23natural. If you feel like your foot wants to be more heel closer to the bike or heel

06:28in, then this is where we would want to stop, reorientate the position of the shoe and then

06:35check again. Do this in small increments because it sometimes only needs a few degrees

06:42to be just perfect. Today we've been using the yellow SPDSL cleats but is there a difference

06:47in float between the different colours? Yes, so with SPDSL it comes in three different

06:52colours. It comes in the yellow, the blue and they also do a red. Now these indicate

06:58different amounts of float. Now float is how much freedom the foot has to rotate before

07:05it comes out of the pedal. The yellows have six degrees, the blues have roughly two degrees

07:13of float and the reds are completely fixed. Look run a similar system, they run red for

07:20nine degrees of float, grey for four and a half degrees of float and black for fixed.

07:27Speedplay have the ability to micro adjust the float. Does everyone need float in their

07:32pedals? Float is important if you have a restriction in your movement, that means that your knee

07:39is not going to track in a perfect straight alignment. This can come from the hip, knee

07:44or simply a core instability that will pull everything out of alignment. Your foot needs

07:50to be able to rotate with that movement otherwise the knee has to take up that additional movement.

07:57This can overload structures in the knee and cause pain. I believe it's a misconception

08:03that everyone needs float and sometimes if you have knee pain, more float may not be

08:09the answer. If the reason you're getting knee pain is because you have instability

08:14and are unable to control the movement of the foot, increasing the amount of freedom

08:19your foot has will just exasperate the issue. In this situation potentially less float may

08:27give you more stability and control but this is something that you should get checked by

08:32a trained fitter. So how would I know if my cleats were set up wrong? You may get an indication

08:39if your cleats are set up incorrectly because you develop a knee niggle, a pain or if you're

08:45feeling that you're on the edge of the float and your foot is not tracking and sitting

08:50in a position that feels natural. If your cleat is not positioned correctly fore and

08:55aft you may find that you drive through your heel more or tend to point your toes or grip.

09:01This can often lead to foot numbness. This may be another indication that your cleat

09:05position may not be quite right. So what we've done today is a good starting point for getting

09:10your cleat in the right position but it's a very complicated part of bike fitting. So

09:17if someone still has any discomfort or pain or any concerns, the best thing to do is to

09:22go along and see someone like yourself I imagine. That's correct. There are areas on top of

09:28this including angles of the foot and the cleat and also dealing with leg length differences

09:33which we'll do from the cleat. Thanks Ben, that's really helpful. If you've got any

09:38more questions on bike fit, leave it in the comments box on the page below this video

09:42and for more bike fitting information visit www.cyclingweekly.co.uk

Category

Transcript

Be the first to comment

Recommended