00:00As-salamu alaykum. This is the Grey Akon Kit. It has an H5 Error and it has been repaired from a couple of places.
00:11We did not get it from there. They replied that it cannot be repaired. Let's see what the problem is.
00:18What is the problem and why it is not getting repaired. I have read a lot of videos of H5 Error.
00:25If you want to watch it, you can watch it completely.
00:28The problem is that one error occurs due to many reasons.
00:33It is not one problem. It is due to one reason.
00:35In this, the capacitor can be damaged, the IPM can be damaged.
00:39And due to many reasons, this error occurs.
00:43Now, let's see what is the problem in this.
00:46First of all, let's connect the reactor wire.
00:50Because the reactor will be connected here.
00:55I have connected the reactor separately.
01:03Now, let's take it out.
01:07So, here it is positive and this is its communication.
01:12This is its communication and this is its N and this is its L.
01:28Now, let's connect it to N.
01:32This is written here.
01:34N is written here and L is written here.
01:36I connect this to N and this to L.
01:38And I connect this to N.
01:41But now you will say that there is no difference in AC.
01:45There is no need in this.
01:46We can connect it as we want.
01:48But this is fine.
01:49But in this, I have put a mark of earth.
01:54Which is on this side.
01:55See, it is written.
01:56See, it is written.
01:57And LN is written on it.
01:59This N is written.
02:00See, this N and this L is written on it.
02:02I always put a mark on the board, on my button.
02:05I put it up.
02:07I put it up because earth is on top.
02:09That's why I don't put it down.
02:11I put it up.
02:12And its NL is put correctly there.
02:15That's why I don't have any problem.
02:17See, I put it in series first.
02:19Yes, this kit is on here.
02:21See, this kit is on.
02:23See, this kit is on.
02:28This is on.
02:30In this way, this kit is fine.
02:32Now, we check its IPM and all these things.
02:35Whether the voltage has come here or not.
02:37I will check everything else now.
02:39First, I check the IPM in such a way that
02:42IPM is fine.
02:43It should be discharged.
02:45It will be discharged now.
02:47After discharging, I check it.
02:49It will be discharged now.
02:50It is discharged now.
02:52Now, there is a little left.
02:53It is discharged.
02:54As it is discharged, I check its entire circuit.
02:57See this.
02:59It is discharged.
03:00Still, we check it.
03:02Whether there is voltage in it.
03:05First of all, I put it on continuity.
03:07After putting it on continuity,
03:09I check its UVW.
03:11See, there is no short.
03:14There is no short.
03:16First of all, we will start on this.
03:17There is no short.
03:18After this, I check its IPM.
03:21This is the IPM.
03:22I have many videos on IPM.
03:24If you can see, then see.
03:26You can check it.
03:27See this.
03:28It is of the same type.
03:29See, this is neutral.
03:30See this.
03:31UV
03:33UVW
03:34It is UVW from here.
03:36And this is its positive.
03:37Now, I put it on positive and check it.
03:40Whether it is fine or not.
03:42To check its IPM,
03:43I will do it like this on buzzer first.
03:45If I put it here,
03:46then I put it here on UVW.
03:48It is the same thing.
03:49If I put it here,
03:50then see here.
03:51This is its.
03:52This is its.
03:53See this.
03:54Okay.
03:55It is giving us a beep from here.
03:56But it is not giving on this.
03:59This beep is not ending.
04:02Something is short.
04:03But it is short.
04:04It did not tell in series.
04:05I have to open it.
04:06Now, I have to see from inside.
04:07Is there any problem with it?
04:10What is the problem?
04:11See this.
04:12I will take it out.
04:20The problem is
04:21the way of working should be
04:23that if you are working on anything,
04:25then you should know that
04:27the fault of this
04:29will be in which part
04:30and what is the fault,
04:32you should trace that part only.
04:33It should not be that
04:35you start from here
04:37and clean up to there.
04:38And all the kit
04:39should be soldered
04:41and all the kit should be spoiled.
04:43Try to understand this.
04:45But if any brother
04:47wants to learn work,
04:48wants to take training,
04:49then he can come and take from us.
04:52This work is like this.
04:53This work,
04:54every mechanic should know this.
04:56Because,
04:57if he does not learn now,
04:59then the problem will be bad in future.
05:01Because, this is the work.
05:03You remove the kit,
05:04you have to take it to the mechanic.
05:06You have a big problem
05:07because of which
05:08you have to face a lot of tension
05:10of the customer.
05:11Now, we will remove the kit.
05:13See the kit is outside.
05:14There is no security.
05:15Now, there is nothing.
05:17This is it.
05:18We remove it.
05:19See outside.
05:20This came out.
05:22See this.
05:23Our kit came here.
05:24Now, we take more of its IPM.
05:26What is the problem with IPM?
05:28How is this short?
05:29What is this?
05:30See this.
05:36But a strange problem.
05:37If there is a short here,
05:38then the bulb did not tell us
05:40what is the problem in it.
05:43What is this?
05:44This is a strange work.
05:46Here,
05:47just now,
05:48we checked from here.
05:50By putting it here,
05:51it was not short.
05:52How did it become short?
05:54If we put it here,
05:55on the positive,
05:56then it is not short.
05:58If we put it from here,
05:59then it is short.
06:00What is this problem?
06:02This is full short from here.
06:06This is U short.
06:07It is not BW.
06:10See this.
06:11This is not short from here.
06:12This is a problem.
06:13Now, what is this?
06:14This is a strange work.
06:15It is not telling us short from here.
06:16When from here,
06:18this short is not telling us
06:19what is the problem.
06:20Now,
06:21from here,
06:22this short is not telling us
06:23what is the problem.
06:26From here,
06:27see this.
06:28What is this problem?
06:34See this.
06:35This is a strange matter.
06:36If the camera can show,
06:37then you can see.
06:38This problem is that
06:39the person who has repaired it,
06:41he has disconnected it from here.
06:45It was an IBM short
06:46because it was repaired.
06:47It was repaired,
06:48but the short could not be cleared.
06:49From here,
06:50see this.
06:51Here,
06:52it is disconnected.
06:53A lot of work has been done from here.
06:55Now,
06:56first of all,
06:57we check its IC.
06:58This is fine.
06:59First of all,
07:00we check the IC.
07:02We have to check this.
07:03We go to the screen,
07:04to the microscope.
07:05First,
07:06with this.
07:13Now,
07:14we have come to the microscope.
07:15See this.
07:16There is a lot.
07:17See this.
07:18See this.
07:19Work has been done.
07:20A lot of work has been done in the kit.
07:22See this.
07:23This is also something.
07:24See this.
07:25A lot of work has been done on it.
07:27But,
07:28first of all,
07:29we check its microprocessor
07:30that there is no problem in it.
07:32Or,
07:33there is no such problem on it
07:35because of which
07:36our kit is not working.
07:49Yes.
07:50Now,
07:51we check it
07:52that what is the problem in it.
07:54Yes.
08:01See this.
08:02The problem is that
08:03the microcontroller
08:04has been shorted here.
08:07Now,
08:08there is no point in repairing it.
08:09Now,
08:10the microcontroller
08:11has been shorted here
08:13because of which
08:14there is a problem in it.
08:16Now,
08:17if we check it in another way,
08:19then
08:20we can see
08:21what is the problem in it.
08:22See this.
08:23I put it here.
08:24How do you put it on one side?
08:26We put it like this.
08:27So,
08:28with this,
08:29see this.
08:30Now,
08:31I see its reading.
08:32This meter,
08:33you put it
08:34here
08:35on the diode.
08:38See this.
08:39Now,
08:40I have started checking it.
08:41Rest,
08:42all of them.
08:43Let's see
08:44what is the problem in it
08:45or what is the problem in it.
08:46Now,
08:47I will check it.
08:48Check its reading.
08:49Show me
08:50how is its reading.
08:55Okay.
08:57And this one.
09:00And this one.
09:10It was shorted
09:11because here
09:12this ground
09:13is cut.
09:16See this.
09:20Its reading
09:21is not correct.
09:22Its microprocessor
09:23is broken.
09:24Its IPM
09:25is also broken
09:26from inside.
09:27Therefore,
09:28this kit
09:29cannot be repaired.
09:30There is no benefit
09:31of wasting time
09:32on this.
09:33If
09:34you see,
09:35there is a problem
09:36that it is not necessary
09:37that every kit
09:38should be repaired.
09:39There are some problems
09:40due to which
09:41this microprocessor
09:42gets shorted
09:43and gets broken.
09:44There is a difference
09:45between the two.
09:46So,
09:47this kit
09:48cannot be repaired.
09:49Now,
09:50whatever
09:51problem
09:52it has,
09:53it should be
09:54repairable.
09:55Okay.
09:56There is a video
09:57of H5
09:58which we have
09:59repaired.
10:00But now,
10:01I don't know
10:02why it was
10:03broken
10:04or what
10:05is the problem.
10:06God knows better.
10:07Or,
10:08those who have done
10:09the work
10:10know what
10:11they have done
10:12and what
10:13they have not done.
10:14They have cut
10:15everything
10:16and tried to
10:17repair it.
10:18Check
10:19all these things.
10:20They have
10:21removed
10:22everything one by one.
10:23Although,
10:24there is no benefit
10:25of removing
10:26everything one by one.
10:27You can give
10:28the result of
10:29any kit after
10:302 to 4 minutes
10:31or 5 minutes.
10:32There is no
10:33problem in it.
10:34It will be
10:35repaired or not.
10:36Thank you
10:37for watching the video.
10:38Subscribe
10:39to our channel.
10:40Goodbye.
Comments