00:00Assalam-o-Alaikum.
00:02We have come to do the AC of Kenwood today.
00:05There are 36 communication errors in this.
00:08All this is open. This is Mr. Mian's shop.
00:10This is his card. This is Mr. Mian's.
00:13This is Mr. Mian himself.
00:15He is getting an error in this.
00:16There was a problem in this. There is an error of 36.
00:19But now, what I have done in this?
00:23This is a matter of noise in this.
00:25Because we are on the road.
00:26We have come to his shop.
00:27This is Mr. Mian's workshop.
00:29We have come to work on this.
00:31Here, I have opened the whole set.
00:36In this, I have, see,
00:38because I had to run it separately.
00:40I have put a fan on this temporarily
00:42so that the IPM does not get heated.
00:45And see the whole system.
00:46This is 6 ampere, 5 ampere, 4 ampere.
00:49It trips on different.
00:52Now, what is the problem with this?
00:54Why does it have an error of 36?
00:57I had come to see this.
00:58I said, I will make a video for you.
01:00It will increase your knowledge.
01:01There are many problems.
01:03Mr. Mian, please turn on the unit.
01:06What I did in this is,
01:09see this,
01:10by putting a lamp,
01:12the supply that goes to the outdoor,
01:14see this,
01:15I have attached a lamp here.
01:18And see this, above the meter,
01:20you can see the reading.
01:21This is its relay.
01:25See this, the voltage that is coming in this,
01:27this is the voltage of the relay.
01:28It is on.
01:30This is the voltage of the relay.
01:31See this, the temperature,
01:32its set temperature is 24.
01:34And our compressor is also on.
01:37See this,
01:38I have picked up the wires of the relay from here.
01:41See this, two.
01:42Okay.
01:43I have put it straight on this.
01:44See this.
01:45Okay, it has come on this.
01:47Now, the problem was that there was an error of 36.
01:50The error of 36 is due to outdoor or indoor.
01:54We have to see this.
01:55In this, I had to see this thing.
01:57It is possible that this relay which is on,
02:00this one,
02:01the one which is on, you can see.
02:02This relay, this is broken.
02:03This is not there.
02:04I had to check this.
02:05The problem of checking this was that
02:07the outdoor was closed.
02:09The problem could have been that
02:11the wire which I have put,
02:13I have put it because
02:14if this relay, this relay,
02:16is hot and closed,
02:17if its coil is broken,
02:18if it gets off for some reason,
02:20then it will happen that
02:22only this supply will be disturbed
02:24and the error will be 36.
02:26But in this, we have to see that
02:28sometimes it happens that
02:29from inside the relay,
02:30this 12 volt,
02:31the supply voltage which it is getting,
02:33this one,
02:34this voltage which is not getting,
02:36due to some reason,
02:37the microprocessor,
02:38if it gets cut off,
02:39or if there is an issue in the IC,
02:41or if there is an issue in its software,
02:44due to that also,
02:45the error will be 36.
02:47After some time,
02:48see, it is cooling now,
02:50in a good way.
02:51See this,
02:52see this,
02:53see this.
02:54Now, what we have to see is that
02:56if from here,
02:57the voltage becomes 0, 0,
02:59this voltage becomes 0,
03:00when,
03:01see this,
03:02see this,
03:03this meter is not there,
03:04this meter was off.
03:05Sorry.
03:06See this,
03:07when the meter will become 0, 0,
03:08from here,
03:09and at the same time,
03:10here,
03:11the display will start having
03:12an error of 36.
03:13This means that
03:14this,
03:15our kit,
03:16turns this off,
03:17and the bulb also,
03:18at the same time,
03:19obviously,
03:20the current is off,
03:21it is not getting.
03:22Now,
03:23the video will be a little long,
03:24and,
03:25sorry for the noise,
03:26because,
03:27there is a road outside,
03:28and with this,
03:29see this,
03:30they have also put an amp meter,
03:31this also,
03:32I will try to show you,
03:33some of this,
03:34that,
03:35no,
03:36our camera,
03:37will do this,
03:38so,
03:39see this,
03:40ok,
03:416 batteries,
03:424 amperes,
03:43and,
03:44this is 5,
03:45see this,
03:46ok,
03:47this,
03:48at the same time,
03:495 amperes,
03:506 batteries,
03:51here,
03:52and,
03:53see this,
03:54now,
03:55a little later,
03:56this will turn off,
03:57and when it will turn off,
03:58this relay,
03:59from the rear,
04:00the current will stop coming,
04:01the current will stop coming,
04:02when that time,
04:03there will be an error of 36.
04:04Here I have a video,
04:05a very important video,
04:06this is the 36 error of Canva.
04:07This kind of video,
04:08on any You Tube,
04:09until now I have not seen,
04:10nor you must have seen,
04:11but,
04:12I am trying to explain you in a good way, tell you the whole thing, what is the problem in what things and what are the faults due to which.
04:23The video is a little long, just because I am doing it, you see, because now it is going to be off, because it turns off in so much time, sometimes it turns off half a minute before,
04:34that's why I have put a fox on it, that if you turn it off, then you will get a view of everything at the same time,
04:42okay, see it is off and after a while it will be 0.0 volt, see the meter, see the bulb is also off, it started blinking 36,
04:52it means that the fault is in the microprocessor, the fault is in our kit, now we will try to repair it,
05:04if you like the video, then like it, share our channel, subscribe, thank you for watching the video, goodbye.
Comments