00:00Hello friends, welcome to Khempu Repair YouTube channel.
00:04Friends, today I have a charging lamp for repair.
00:08The problem with this lamp is that its battery is not getting charged.
00:12The problem is that it can come in any lamp.
00:16The battery is not getting charged.
00:18But when we put it on charging, its LED glows.
00:22And when we remove it from charging, it turns off.
00:25Today we will solve this problem.
00:27And in this video, I am going to give you complete information.
00:31How can you repair your lamp if you have this problem?
00:36So let's start the video.
00:39Friends, this is the lamp that is not getting charged.
00:43I turned it on and showed you, but it is not getting charged.
00:47Now I will put it on charging and show you.
00:49As soon as I put the pin, the light of this lamp turns on.
00:55And after removing the pin, it turns off.
00:58There is no difference with the regulator.
01:00This means that there is a problem with its battery.
01:03We have to open it and see what the problem is.
01:07I open it.
01:09There are screws here.
01:11And you can see that the battery is 1 ampere.
01:16Now there are wires on the battery.
01:20The battery does not seem to be fully charged.
01:22But I hope that the battery will be damaged.
01:26I will check the voltage first.
01:28It is 3.9 volts.
01:32And when I check the voltage again after turning it on,
01:37the voltage is down.
01:39This means that the battery is damaged.
01:41Because there is no volt in it.
01:43It is just showing the battery, but there is no volt in it.
01:46We will have to change the battery and put a new one.
01:52I will put a new battery and check if the battery is damaged or not.
01:58I have taken a new 1 amp battery.
02:02And I have connected the wires of this battery.
02:05This battery is working.
02:07There is no problem with this battery.
02:09This means that the battery was damaged.
02:11We will put this battery and remove it.
02:13Because it is damaged.
02:14You can see the connection.
02:16The white wire is of negative volt.
02:20And the black wire is of positive volt on the regulator.
02:25This way you can repair the lamp.
02:28If you like this video, please like and share it.
02:30Subscribe to the channel.
02:32See you in the next video.
02:34Thanks for watching.
Comments