Do you want to remove all your recent searches?

All recent searches will be deleted

Like
Watch Later
Share
Add to

Eastport , got the shakes, PDP.

9 years ago154 views

Preparing Your Surfaces

Proper surface preparation is the key to maximum stain performance. The durability of this product can be impaired by an unsound or poorly prepared surface. It is very important that the surface be clean of all dirt, mildew stains, loose wood fibers and other foreign matter. In order to be effective, a stain must be able to penetrate. Surfaces must be structurally sound and absolutely dry. (Moisture content must be below 15%, or wood must be exposed to dry weather a minimum of 3 to 5 days.) Previously semi-transparent stained or weathered wood surfaces must be either sanded, scrubbed with a detergent solution or Cabot Problem-Solver® Wood Cleaner and a stiff bristle brush, or power washed to remove the surface layer of all loose wood fibers, dirt, mildew stains, chalky residue and other foreign matter. Use Cabot Problem-Solver Strippers (8004, 8005) to safely remove all stains and paints from wood surfaces. Use Cabot Problem-Solver Wood Brightener to easily remove nail and metal rust stains, and renew the wood's appearance. New smooth wood that is unseasoned or appears shiny should be allowed to weather sufficiently before staining, but generally no longer than three months.

Report this video

Select an issue

Embed the video

Eastport , got the shakes, PDP.
Autoplay
<iframe frameborder="0" width="480" height="270" src="//www.dailymotion.com/embed/video/x9i191" allowfullscreen allow="autoplay"></iframe>
Add the video to your site with the embed code above